Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the Appliance 11
- How to save Energy 14
- Turning the Appliance On / Off 16
- The Right Temperature 18
- Using SuperCool in the refrigerator section 21
- Using SuperCool in the freezer section 22
- Temperature and Door Alarm 23
- Additional Settings 25
- Using the Refrigerator Efficiently 30
- Arranging the Interior - Refrigerator Section 32
- Freezing and Storing Food 34
- Making Ice Cubes 36
- Arranging the Interior - Freezer Section 39
- Defrosting 41
- Cleaning and Care 42
- Frequently asked questions 46
- Noises 54
- After sales service 55
- Caring for the environment 58
- Installation Information 59
- Installation Dimensions 62
- Niche Dimensions 64
- Door Swing Clearance 65
- Planning the Water Connection 66
- Information Concerning the door panel 67
- Installing the Appliance 69
- Installing the Appliance 69
- Installing the anti-tip brackets 69
- Fastening the covers 71
- Pushing the appliance into the niche 72
- Aligning the appliance 72
- Securing the appliance in the niche 73
- Aligning the appliance door 73
- Aligning the drawer front 74
- Install the base cover with the ventilation slits 74
- Removing the mounting rails 76
- Installing the mounting rails on the door panel 77
- Installing the door panel on the appliance door 77
- Installing the door panels on the freezer drawers 81
- Plumbing 82
- Electrical connection 86
- Contact details 91
To adjust the depth of the door panel,
^ loosen the three screws located on
the upper side of the upper mounting
rail. Now you can adjust the depth of
the door panel.
^ Then tighten the screws.
^ If necessary, do the same on the
lower mounting rail.
^ Attach the upper cover piece a.
^ Attach the supplied seals b between
appliance door and door panel.
Installing the Appliance
80