Operating and Installation Instructions Fridge-Freezer Combination To prevent accidents and damage to the appliance, you must read all instructions supplied before installing for using the appliance. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guide to the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 How to save Energy . . . . . . . . . . . . . . . . . . . .
Contents Freezing and Storing Food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Maximum freezing capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Freezing fresh food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Placing food in the freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Thawing frozen foods . . . . . . . . . . . . . . .
Contents Installation Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Opening angle of the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Niche Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Door Swing Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Planning the Water Connection . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use to prevent accidents and machine damage. This appliance complies with all applicable safety laws and regulations. However, improper use can result in personal injury and material damage. Before using the appliance for the first time, carefully read the operating and installation instructions.
IMPORTANT SAFETY INSTRUCTIONS Safety with children ~ Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. ~ Children ages 8 and up may only use the appliance unsupervised if they have been shown how to use it in a safe manner, and if they are able to recognize and understand the potential risks of improper use. ~ Children must not be allowed to clean or service the appliance without supervision.
IMPORTANT SAFETY INSTRUCTIONS ~ To protect the refrigerator from possible damage, take care that it always remains in an upright position. Any time it is moved or installed, always let it stand for 30 to 60 minutes before plugging it in. This allows the coolant and lubricant to settle down, which is essential for proper operation. ~ Before connecting the appliance, make sure that the connection data on the data plate (fuse rating, voltage and frequency) matches the power supply.
IMPORTANT SAFETY INSTRUCTIONS ~ Only with original Miele parts can the manufacturer guarantee the safety of the appliance. Defective components should only be replaced with parts from Miele. ~ Miele will not be held liable for damage resulting from a faulty connection to the water supply. ~ The ice cube maker is not intended to be used with a hot water supply line.
IMPORTANT SAFETY INSTRUCTIONS ~ Use only original Miele parts. Adding or installing other parts will void any warranty and/or product liability claims. Cleaning and care ~ Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Transport ~ Always transport the appliance in an upright position and in its original transport packaging to avoid damage in transit. ~ Due to the size and weight of the appliance, it must be transported by two people.
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance ~ Risk of suffocation. Children playing can shut themselves in and suffocate. – Take the door(s) off. – Remove the drawers. – Leave the storage shelves in the appliance so that children cannot easily climb into the appliance. ~ Danger of electric shock – Cut off the plug from the power cord and discard. – Cut off the power cord from the discarded appliance. Dispose of separately from the appliance.
Guide to the Appliance Control panel Refrigerator section Freezer section a Alarm-off button for silencing the door alarm, or the temperature alarm of the freezer section g Indicator lights: ; Temperature alarm for the freezer section ® Ice cube maker is On ª SuperCool is On b Button for turning SuperCool On / Off ª c Button for turning the refrigerator section On / Off d Button for setting a higher or lower temperature in the refrigerator section e Indicator lights: t Power failure [ Air filter dirty
Guide to the Appliance a Control panel b Interior lighting c Fan d Egg tray / Door shelf e Shelf f Bottle rack g Bottle shelf with bottle divider h Fruit and vegetable drawers i Automatic ice cube maker behind the drawer j Freezer section interior lighting k Freezer drawers l Base cover with air filter behind it m Water connection 12
Guide to the Appliance Included accessories Optional accessories Bottle rack Bottle rack (see "Included accessories" for more information) Optional accessories are available from Miele, your Miele dealer or online. The bottle rack allows you to store bottles horizontally, which saves space. The bottle rack can be used at several locations in the appliance.
How to save Energy Installation / maintenance Temperature setting Normal energy consumption Increased energy consumption In a well ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, stove/oven). Near a heat source (radiator, stove/oven). Where the room temperature is ideal, i.e. around 20°C. Where the room temperature is higher. Do not block the ventilation openings, and keep them clean.
How to save Energy Normal energy consumption Use Increased energy consumption The drawers and shelves are in the original arrangement. Only open the doors when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door or for long periods will allow the cold to escape and warm air to enter. The appliance tries to keep the temperature low and the compressor runs longer.
Turning the Appliance On / Off Before the first use It is very important to let the appliance stand for 30 to 60 minutes after transport before you plug it in for the first time. Failure to do so can prevent the appliance from functioning properly! Packaging material ^ Remove all packaging material from the inside of the appliance. Protective film The stainless steel trim and covers are covered with a film to protect them during transportation. ^ Pull the protective film off the stainless steel surfaces.
Turning the Appliance On / Off The alarm symbol ; on the control panel flashes until the selected temperature is reached. The interior lighting will come on when the refrigerator door or a freezer drawer is opened. Allow the appliance to run for a few hours before placing food in it. Do not place food in the freezer section until the temperature is cold enough (at least 0°F / -18°C).
The Right Temperature The right temperature is very important for storing food. If food is not stored at the right temperature, bacteria can multiply rapidly, causing the food to spoil. This can be prevented or delayed by selecting the right temperature. Temperature affects the rate at which bacteria multiply. Reducing the temperature slows down this process.
The Right Temperature Temperature display In normal operation the display shows the current average refrigerator temperature and the temperature in the warmest part of the freezer. Dashes are displayed if the temperature in the freezer section is not within the displayable range. Depending on the room temperature, it can take several hours (3 to 8) until the selected temperature is reached and displayed steadily.
The Right Temperature When you tap the buttons, you will see the following changes in the display: – When first tapped: The last temperature selected flashes. – Every new tap: The temperature value changes in increments of 1 degree. – Holding down the button will change the temperature value continuously. Approximately 5 seconds after you release the button, the actual temperature in the appliance will be displayed. If you have changed the temperature and the appliance is not very full, wait approx.
Using SuperCool in the refrigerator section The SuperCool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Turning on SuperCool SuperCool is particularly recommended for quickly cooling large amounts of fresh food or drinks. ^ Touch the button for turning SuperCool on and off so that the ª symbol to the left of the display will come on.
Using SuperCool in the freezer section For best results, turn on SuperCool before putting fresh food into the freezer. Fresh food will be frozen quickly, so that the nutritional value, vitamin content, appearance and taste are maintained. Exceptions: – if you are loading frozen food into the freezer. – if you are not loading more than 4.5 lbs (2 kg) fresh food into the freezer per day. Turning SuperCool on SuperCool should be turned on 6 hours before you place fresh food in the freezer.
Temperature and Door Alarm The appliance is equipped with a warning system to ensure that the temperature in the freezer section does not rise unnoticed and to avoid energy being wasted if doors or drawers are left open. Temperature alarm If the temperature was above 0°F (-18°C) for a longer period of time, you will need to check to make sure that no frozen food started to thaw.
Temperature and Door Alarm Door alarm An alarm will sound if the appliance door or a freezer drawer is left open for more than 3 minutes. The alarm will stop as soon as the door or the freezer drawer is closed. Turning off the audio alarm If the alarm signal bothers you, it can be silenced. ^ Touch the alarm button. The alarm sound will turn off.
Additional Settings Certain appliance settings can only be selected in the settings mode.
Additional Settings Turning Sabbath mode On / Off If not manually deactivated, Sabbath mode is automatically deselected after approx. 120 hours. ^ Press and hold the SuperCool button for the freezer section On / Off button for 5 seconds. Safety lock c The SuperCool indicator ª to the right of the display is on during this time, and after 5 seconds S flashes in the lower temperature display (freezer section). The display shows MENU. You are now in settings mode. ^ Touch the Super button again.
Additional Settings ^ Touch the Super button again to confirm your selection. 0 appears in the control panel when the safety lock is activated. ^ To leave the settings mode, touch the button for turning the freezer section on and off. Temperature unit (Fahrenheit or Celsius) § The temperature can be displayed in Fahrenheit (°F) or Celsius (°C). The factory default is Fahrenheit. Selecting the temperature unit ^ Press and hold the SuperCool button for the freezer secion On / Off button for 5 seconds.
Additional Settings Brightness of the display ^ You can adjust the brightness of the display to suit the light conditions in the room. There are five different brightness settings. The factory default setting is 5 (maximum brightness). ^ You can change the brightness within levels 0 to 5 by tapping the button for setting the temperature in the freezer section. ^ Touch the Super button again to confirm your selection.
Additional Settings Lower hinge heating control H If condensed water appears in the lower hinge area or on the base plate between the refrigerator and freezer compartments, increase the output of the heating located behind the base plate. Factory default is H A. Condensation does not occur at normal room temperature and humidity. The heating prevents condensation at high humidity and low room temperature.
Using the Refrigerator Efficiently Different storage zones Warmest area Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. The warmest areas in the refrigerator are in the top section towards the front and in the top of the door. Use this for storing butter and cheese.
Using the Refrigerator Efficiently WARNING! Danger of fire Do not use small electric appliances inside the food storage compartments of the appliance, unless recommended by the manufacturer. Do not store explosive materials in the appliance or any flammable products (e.g. spray cans). Danger of explosion! If you store food containing oil or fat in the appliance or in the refrigerator door, make sure that fat or oil does not drip on the plastic components of the appliance.
Arranging the Interior - Refrigerator Section Adjusting the shelves Fruit and vegetable drawers The shelves can be adjusted according to the height of the food. The fruit and vegetable drawers can be removed for loading and unloading or for cleaning. ^ Lift the shelf at the front, pull it forwards slightly, lift the recess over the support ribs and move the shelf up or down. The edge of shelf's rear stop must face upwards so that food does not touch the rear wall and freeze to it.
Arranging the Interior - Refrigerator Section Adjusting the door shelf / bottle shelf ^ Lift the hanging container up and out of the stainless steel support frame. Adjusting the bottle divider The bottle divider can be moved to the left or right. This holds the bottles more securely in position when the door is opened and closed. The bottle divider can be removed completely (e.g. for cleaning): ^ Slide the front edge of the bottle divider up and lift the bottle divider out.
Freezing and Storing Food 24 h before freezing WARNING! Danger of fire Do not use small electric appliances inside the food storage compartments of the appliance, unless recommended by the manufacturer. Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity within a 24-hour period is listed on the data plate as "Freezing capacity ...lbs/24 hrs".
Freezing and Storing Food Thawing frozen foods Cooling drinks quickly Frozen food can be thawed in various ways: Bottles that are put in the freezer for quick cooling must be removed within one hour. Otherwise, they could burst.
Making Ice Cubes For the automatic ice cube maker to operate it must be connected to the household water supply. Turning the ice cube maker On ^ If not done yet open the water supply to the ice cube maker. ^ Turn the freezer section On. ^ Touch the button for turning the ice cube maker on and off so that the indicator light of the ice cube maker ® comes on. Ice cubes can only be produced if both freezer drawers are completely closed.
Making Ice Cubes Turning the ice cube maker Off The ice cube maker can be turned off independently of the freezer section if you do not want to make any ice cubes. ^ Touch the button for switching the ice cube maker on and off so that the indicator light of the ice cube maker ®goes out. When the ice cube maker will be turned off for a long period of time: Setting the water quantity for the ice cube tray E The size of the ice cubes that are produced depends on the quantity of inflowing water.
Making Ice Cubes ^ You can change the water quantity within levels 1 to 8 by tapping the button for setting the temperature in the freezer section. ^ We recommend increasing the water quantity by one level only (first to E4) and then check whether the ice cubes are big enough. Do not increase by more than one step. If the adjusted size is too big, the ice cube tray of the ice maker could overflow. ^ Touch the Super button again to confirm your selection.
Arranging the Interior - Freezer Section Freezer drawers Adjusting the separators Both freezer drawers can be used for freezing and storing food. You can adjust the separators in the lower freezer drawer according to your needs. The ice maker a is located above the upper drawer b on the left side. The upper drawer b is divided by a partition wall c for storing ice cubes in the left part of the drawer.
Arranging the Interior - Freezer Section Removing the freezer drawer containers You can remove the freezer drawer containers for better cleaning. ^ Lift the container at the front left and right (1) and push it slightly backwards (2). ^ Lift the container out. ^ Replace the container by reversing the removal procedure.
Defrosting Freezer section WARNING! Risk of injury and damage. Do not use other means to accelerate the defrosting process, other than those recommended by the manufacturer. Refrigerator section The refrigerator defrosts automatically. During normal operation, condensate and frost can form on the back wall of the refrigerator section. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the compressor.
Cleaning and Care WARNING! Danger of electric shock. Unplug refrigerator or disconnect power. – abrasive cleaning agents e.g. scouring powder or scouring cream cleansers, pumice stone, – stainless steel cleaners, – dishwasher cleaner, Danger of fire. Do not damage the coolant circuit. – oven sprays, – glass cleaners, Do not let water get into the electronic unit or the lighting, or on the metal contacts in the left-hand shelf support. Cleaning water must not get into the drain hole.
Cleaning and Care Before cleaning ^ Turn the appliance off. The display goes dark and the cooling is turned off. If this is not the case, the safety lock is on (see "Additional settings Turning the safety lock on and off). ^ Unplug the power cord from the outlet or trip the circuit breaker. ^ Take any food out of the appliance and store it in a cool place. ^ Take all removable parts out for cleaning.
Cleaning and Care Cleaning the air filter [ ^ Clean the air filter in the dishwasher or by hand with warm water and liquid dish soap. ^ Replace the air filter by reversing the removal procedure. ^ The air filter should be cleaned when the air filter symbol [ on the control panel comes on. ^ Remove the cover with the ventilation slits. No tools are required. ^ Replace the cover with the ventilation slits.
Cleaning and Care Resetting the air filter indicator [n The air filter indicator [ must be reset after each filter cleaning. ^ Press and hold the SuperCool button for the freezer section On / Off button for 5 seconds. The SuperCool indicator ª to the right of the display is on during this time, and after 5 seconds 5 flashes in the lower temperature display (freezer section). The display shows MENU. You are now in the settings mode.
Frequently asked questions You can easily resolve many of the minor problems you may encounter during everyday use. With the aid of the following guide, the cause of a problem can be found and eliminated. If necessary, contact Miele Technical Service for assistance. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently asked questions The compressor runs more and more often and for longer periods of time, the temperature in the appliance drops. Problem Possible cause Solution ^ Correct the temperature The temperature in The temperature in the setting. the appliance is too appliance is too low. low. The freezer drawers are not ^ Check that the drawers are closing properly. closed all the way. A large amount of food is being frozen at once. ^ A large amount of food is being frozen at once.
Frequently asked questions Problem Possible cause Solution The ventilation slits in the base of the appliance are blocked or dusty. ^ Do not block the ventilation slits. ^ Clean the ventilation slits on a regular basis. ^ Only open the doors or The door or the drawers the drawers when were opened frequently, or necessary and for as a large amount of fresh food short a time as possible. was put in all at once for freezing. After a while the temperature will return to normal on its own.
Frequently asked questions The compressor comes on less and less often and for shorter periods of time, the temperature in the appliance rises. Problem Possible cause Solution The temperature in the appliance is too high. This is not a fault. ^ Correct the temperature setting. The food begins to thaw. The room temperature is too low for this appliance. The compressor runs less often if the room temperature is too low. Therefore it may become too warm in the freezer section.
Frequently asked questions Indication in the display Problem Possible cause Solution The power outage t indicator is on and the temperature indicator for the freezer section flashes. The temperature in the appliance rose too much in the past days or hours because of a power outage. The appliance will go back to the last temperature setting when the power is back on. ^ Touch the Alarm button. Now the highest temperature that occurred in the freezer section during the power outage is displayed.
Frequently asked questions Interior lighting Problem Possible cause The interior lighting The interior lighting is not working. automatically switches off if the door has been open for approx. 15 minutes. If that is not the reason, then there is a problem. Solution ^ Contact Miele Technical Service. The LED lighting may only be repaired by Miele. There are current-carrying parts behind the light cover.
Frequently asked questions Additional problems Problem Possible cause Solution Food has frozen together or to the wall. The food packaging was not dry when loaded in the freezer. ^ Use a blunt instrument (such as a spoon handle) to carefully pry them apart. The appliance cannot be turned off. The safety lock is activated. ^ Turn the safety lock off (see "Settings - Turning The 0 indicator on the the safety lock on and control panel is on. off").
Frequently asked questions Problems with the ice cube maker Problem Possible cause Solution The ice cube maker The appliance is not will not turn on. connected to the power supply or is not turned on. ^ Plug in the power cord and turn the appliance On. The ice cube maker The appliance or the ice does not produce cube maker is not turned any ice cubes. on. ^ Turn the appliance and the ice cube maker on. The water supply line is not open. ^ Open the water supply.
Noises Normal noises What causes them Brrrrr... This noise may get louder for brief periods when the motor kicks on. Blub, blub.... A gurgling noise can be heard when the refrigerant circulates through the pipes. Click.... Clicking sounds occur whenever the thermostat turns the motor on or off. Sssrrrrr.... In multi-section and frost-free appliances, the movement of air circulating through the appliance can sometimes just barely be heard.
After sales service In the event of a fault which you cannot correct yourself, please contact – your Miele dealer or – Miele Technical Service. See back cover of the this manual contact details. When contacting Miele Technical Service, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance. Warranty For additional information, please refer to your warranty booklet.
Installation Instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use.
Caring for the environment Disposing of the packaging materials The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.
Installation Information Location Safe operation of the appliance is only assured if it has been installed and connected in accordance with these Operating and Installation Instructions. WARNING! Danger of tipping! To avoid a hazard secure the appliance in accordance with these instructions. WARNING! This appliance is very heavy and can tip forwards when the door / freezer drawers are open.
Installation Information Climate class Niche floor The appliance is designed for use within a certain climate range (room temperature range) and should not be used outside this range. The climate range is specified on the data plate inside the appliance. To ensure that the appliance is installed safely and to assure all the functions, the floor of the niche where the appliance is to be installed must be even and horizontal.
Installation Information Proper ventilation Use only the matching base cover with the ventilation slits! If there is insufficient ventilation, the compressor will run more often and over a longer period of time. This results in higher energy consumption and a higher compressor temperature which can damage the compressor. This appliance does not require ventilation openings in the surrounding cabinetry. Proper ventilation is ensured though the ventilation slits at the base of the appliance.
Installation Dimensions Before installation, ensure the building-in niche is the correct size. The specified ventilation cross-sections must be adhered to in order to ensure the correct functioning of the appliance.
Installation Dimensions Opening angle of the door Ensure that there is sufficient space at the installation location for the door to open wide enough. a This dimension line indicates the height measured from the floor. These measurements do not take the cabinet front and the door handle into account; they must be added on accordingly.
Niche Dimensions The location of the electrical outlet can be within a radius of 80" from the appliance top center.
Door Swing Clearance a Top view b Right side wall of appliance housing c Front of appliance housing d Front panel - door closed e Front panel - door opening angle = 115° f Panel thickness 65
Planning the Water Connection Water line feed-in (D) from left or right above the anti-tipping bracket.
Information Concerning the door panel Inset installation Appliance and panels sit fully within the opening and are flush with what could be its own box, between two pantry cabinets or decorative columns, etc. This is the most common installation scenario. a Cabinet frame b Door panel Stainless steel front panels are available through Miele.
Information Concerning the door panel Frameless installation With this installation style, wider appliance panels partially overlay the shared side gables of adjacent cabinetry so as to mimic the look of a frameless style cabinet. a Cabinet frame b Door panel Please take into account the following information concerning the door panel: – The panels should be at least 5/8" (16 mm) thick to allow the connecting rails to be fastened to them. – The maximum panel thickness is 3/4" (19 mm).
Installing the Appliance Installing the Appliance ,Warning! This appliance is very heavy and can tip forwards when the door is open. ^ Before installation, take any accessories out of the appliance and/or off the back of the appliance. ^ Remove any cable clips from the back of the appliance. ^ Check that all the parts on the back of the appliance can move freely. Carefully bend any attached components out of the way.
Installing the Appliance ^ Depending on the floor and walls of the room, select the installation method for the bracket from the following options: A, B, C or D. C A – Securing to a wooden floor (screws: 1/4'' x 2 1/2'') (6 x 63 mm) D – Securing to a drywall base (screws: 1/4'' x 2 1/2'') (6 x 63 mm) – Securing to a concrete wall using screw anchors (screws: 1/4'' x 2 1/2'') (6 x 63 mm) B – Securing to a concrete floor using the supplied concrete anchors.
Installing the Appliance Installation of the anti-tip bracket in a cabinet with a depth greater than 25" (635 mm) The anti-tip bracket assures proper functioning up to a cabinet depth of 24" - 25" (610-635 mm). If the cabinet is deeper than 25" (635 mm), a wooden spacer is required between the back wall of the niche and the appliance. The anti-tip bracket must be level after installation even if the floor is not level. Install the wooden spacer in an appropriate position.
Installing the Appliance Pushing the appliance into the niche Aligning the appliance Prepare the water and electrical connections. ^ Gently push the appliance into the niche until the back of the appliance slides into the anti-tip bracket. Take care not to damage the power cord and plumbing. ^ Use the supplied wrench to adjust the front feet so that the appliance is level a.
Installing the Appliance Securing the appliance in the niche Aligning the appliance door The appliance comes with the door properly aligned. Realignment may be necessary if the door is heavily loaded. ^ Push the hinged side of the appliance to the cabinet wall. ^ Connect the appliance to the cabinetry by screwing the particle-board screws 1/4" x 3/4" (4 x 16 mm) through the pre-mounted brackets. ^ Now attach the covers to the mounting plates. ^ Loosen the screws a.
Installing the Appliance Aligning the drawer front You can adjust the fronts of the freezer drawers if necessary. Install the base cover with the ventilation slits Side view of the freezer drawer open ^ Remove the lower freezer drawer. ^ Remove the blue protective film from the supplied air filter. ^ Insert the air filter into the opening in the base. Push the latch down and engage it. ^ On both sides, remove the screws and put them in the long holes below. ^ Align the drawer front.
Installing the Appliance ^ Insert the base cover retainers on both sides into the appliance housing. ^ The face end of the angles on the retainers must be flush with the front of the toe-kick cover. If this is not the case, adjust the retainers according to the depth. ^ Insert the locking pins on both sides to secure the retainers in the appliance housing. ^ Now install the base cover with the ventilation slits. There are two fastening bolts on each side of the base cover (see illustration detail).
Installing the Appliance Both mounting rails will later be fastened to the door panel of the refrigerator door. ^ To adjust the toe-kick height, first loosen the headless screws at the cover front and adjust the cover height. ^ Then tighten the headless screws. ^ Remove the cap covers and loosen the screws on both sides. Removing the mounting rails ^ Remove the mounting rails on the sides of both freezer drawers. These mounting rails will later be installed on the door panel of the freezer drawers.
Installing the Appliance Installing the mounting rails on ^ Fasten the mounting rails to the door panels with at least 3 screws (1/4'' x the door panel 5/8'') (4 x 16 mm). Installing the door panel on the appliance door ^ Using a pencil, draw two thin, horizontal lines on the inside of the door panel for the refrigerator door. The distance from the lower edge of the cabinetry front to the upper line is 41" (1041 mm) and to the lower line it is 4 1/4" (107.5 mm).
Installing the Appliance Aligning the door panel ^ Open the refrigerator door and hang the door panel from above onto the adjustment bolts. ^ Loosely screw the nuts onto the adjustment bolts. To vertically align the door panel with the adjacent cabinet doors, ^ Close the appliance door and check the distances to the adjacent door panels. ^ loosen the nuts again and adjust the respective adjustment bolts.
Installing the Appliance To horizontally align the door panel with the adjacent cabinet doors, ^ Tighten the adjustment bolts on the lower side of the appliance door until the mounting rail sits tight on the appliance door. ^ slide the door panel to the respective side (via the long holes in the mounting rails). ^ Tighten the nuts. ^ Screw the nuts onto the adjustment bolts and tighten them.
Installing the Appliance To adjust the depth of the door panel, ^ Attach the upper cover piece a. ^ Attach the supplied seals b between appliance door and door panel. ^ loosen the three screws located on the upper side of the upper mounting rail. Now you can adjust the depth of the door panel. ^ Then tighten the screws. ^ If necessary, do the same on the lower mounting rail.
Installing the Appliance Installing the door panels on the freezer drawers ^ Now do the same on the lower freezer drawer. ^ When finished, close the gap between the freezer drawer and the door panel with the supplied adhesive seal. ^ Remove the protective foil from the adhesive side of the seal and stick the seal onto the upper edge of the freezer drawer. Make sure that the seal is properly positioned in the gap.
Plumbing Information regarding the water connection All plumbing work should be carried out by a suitable qualified person, in accordance with local and national regulations. Disconnect the appliance from the power supply before connecting it to the water supply. The appliance must be connected to a cold water line that: – is directly connected to the fresh water supply in order to ensure a circulation of the water in the cold water line. Avoid using a water line in which the water is allowed to pool.
Plumbing Connecting the water supply Before any installation or maintenance work is performed be sure the appliance is disconnected from the electrical supply. The water connection can be found at the front of the appliance: ^ Lay the water line to the appropriate location at the back of the appliance. ^ At the same time feed the electrical cord from the back of the appliance out of the installation niche. ^ Gently push the appliance into the desired location.
Plumbing The solenoid valve b can be found at the front of the appliance. It has a 3/4" connection thread (the position of the solenoid valve as shown in the picture may differ from your appliance). ,In the following, please note: inserting the water filter incorrectly can cause damage! ^ Place the water filter e on top of the adapter c as shown in the picture. ,Do not over-tighten the union nut, damage can result! ^ Connect the union nut d to the solenoid valve b and tighten it.
Plumbing ^ The appliance can now be connected to the power supply (see "Electrical connection"). ^ Slide the appliance into the desired position. When doing so, make sure that the water line does not get kinked or damaged. Caution! Risk of damage to the ice cube maker! During the operation of the ice cube maker, do not interrupt the water supply.
Electrical connection ,Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may result in electric shock. If you are in any doubt as to whether the appliance has been properly grounded, have the appliance checked by a qualified electrician or service technician. Installation, repairs and other work by unqualified persons could be dangerous.
Electrical connection The appliance must be connected to an electrical outlet that is properly grounded. The electrical installation must comply with the applicable electrical code. The plug must be easily accessible and not concealed behind the appliance so that the appliance can quickly be disconnected from the electricity supply in an emergency. In addition, no other appliances should be plugged into a socket located directly behind this appliance.
KFN 9855 iDE en - US, CA M.-Nr.
