Installation Instructions

Installation of the anti-tip bracket in a
cabinet with a depth greater than 25"
(635 mm)
The anti-tip bracket assures proper
functioning up to a cabinet depth of 24"
- 25" (610-635 mm). If the cabinet is
deeper than 25" (635 mm), a wooden
spacer is required between the back
wall of the niche and the appliance.
The spacer must be secured to the
floor.
Position of the spacer in a normal
cabinet
Position of the spacer in a frameless
cabinet
The anti-tip bracket must be level
after installation even if the floor is
not level. Install the wooden spacer
in an appropriate position.
Fastening the covers
Install the adhesive covers above,
between and under the mounting plates
on the sides of the appliance.
^ Cut the covers to the required length
(see illustration).
^ Fasten the covers keeping a 1/4"
(6 mm) clearance from the mounting
plates.
Installing the Appliance
71