Technical data

KWT 1602 Vi [mm] KWT 1602 Vi [mm] KWT 1602 Vi [mm]
KWT 1602 Vi [mm] KWT 1602 Vi [mm] KWT 1602 Vi [mm]
A) Appliance door width: 677 mm
B) Furniture front (max. 38 mm)
C) Door handle
D) Distance between appliance door and the wall (excluding
furniture front and door handle): 299 mm
A) Appliance door width: 677 mm
B) Furniture front (max. 38 mm)
C) Door handle
For Side-by-Side installation
1)=sidewallheater
Door front KFP 1060 SS dimensions
N.B. Air vents must not be covered or blocked in any way.
The recommended thickness of furniture front is 1.9cm but
could be increased to 3.8cm. In this case the niche depth
has to be increased accordingly and maximum weight has to
be considered.
A 5 x 40 cm cut-out should be provided in the furniture housing unit where a 200 cm
2
ventilation gap is stipulated.
During periods of high humidity, some condensation may appear on outside surfaces of cooling appliances. This condensation will
disappear when humidity levels drop. For prevention it is advisable to install the appliance with sufficient ventilation in a dry and/or an air-
conditioned room. Please ensure that doors are closing and sealing properly.
Building-in diagrams: KWT 1602 Vi
KWT 1612 Vi [mm]
KWT 1612 Vi [mm]KWT 1612 Vi [mm]
KWT 1612 Vi [mm]
A) Appliance door width: 677 mm
B) Furniture front (max. 38 mm)
C) Door handle
D) Distance between appliance door and the wall (excluding
furniture front and door handle): 299 mm
A) Appliance door width: 677 mm
B) Furniture front (max. 38 mm)
C) Door handle
N.B. Air vents must not be covered or blocked in any way.
The recommended thickness of furniture front is 1.9cm but
could be increased to 3.8cm. In this case the niche depth
has to be increased accordingly and maximum weight has to
be considered.
A 5 x 40 cm cut-out should be provided in the furniture housing unit where a 200 cm
2
ventilation gap is stipulated.
During periods of high humidity, some condensation may appear on outside surfaces of cooling appliances. This condensation will
disappear when humidity levels drop. For prevention it is advisable to install the appliance with sufficient ventilation in a dry and/or an air-
conditioned room. Please ensure that doors are closing and sealing properly.
Building-in diagrams: KWT 1612 Vi
Door front KFP 1060 SS dimensions
KWT 1612 Vi [mm]
For Side-by-Side installation
1)=sidewallheater
A) Niche Width : 610-613mm
KWT 1612 Vi [mm]
A) Niche Width : 610-613mm
82 83