Technical data

KF 1801 Vi [mm]
KF 1801 Vi [mm]
KF 1801 Vi [mm]
KF 1801 Vi [mm]
A) Appliance door width: 829 mm
B) Furniture front (max. 38 mm)
C) Door handle
A) Appliance door width: 829 mm
B) Furniture front (max. 38 mm)
C) Door handle
D) Distance between appliance door and the wall (excluding
furniture front and door handle): 363 mm
N.B. Air vents must not be covered or blocked in any way.
The recommended thickness of furniture front is 1.9cm but
could be increased to 3.8cm. In this case the niche depth
has to be increased accordingly and maximum weight has to
be considered.
A 5 x 40 cm cut-out should be provided in the furniture housing unit where a 200 cm
2
ventilation gap is stipulated.
During periods of high humidity, some condensation may appear on outside surfaces of cooling appliances. This condensation will
disappear when humidity levels drop. For prevention it is advisable to install the appliance with sufficient ventilation in a dry and/or an air-
conditioned room. Please ensure that doors are closing and sealing properly.
Building-in diagrams: KF 1801 Vi
KF 1801 Vi [mm]
For Side-by-Side installation
1=sidewallheater
KF 1801 Vi [mm]
Door front dimensions
K 1801 Vi [mm] K 1801 Vi [mm] K 1801 Vi [mm]
K 1801 Vi [mm] K 1801 Vi [mm]
K 1801 Vi [mm]
A) Appliance door width: 829 mm
B) Furniture front (max. 38 mm)
C) Door handle
D) Distance between appliance door and the wall (excluding
furniture front and door handle): 363 mm
A) Appliance door width: 829 mm
B) Furniture front (max. 38 mm)
C) Door handle
For Side-by-Side installation
1=sidewallheater
Door front dimensions
N.B. Air vents must not be covered or blocked in any way.
The recommended thickness of furniture front is 1.9cm but
could be increased to 3.8cm. In this case the niche depth
has to be increased accordingly and maximum weight has to
be considered.
A 5 x 40 cm cut-out should be provided in the furniture housing unit where a 200 cm
2
ventilation gap is stipulated.
During periods of high humidity, some condensation may appear on outside surfaces of cooling appliances. This condensation will
disappear when humidity levels drop. For prevention it is advisable to install the appliance with sufficient ventilation in a dry and/or an air-
conditioned room. Please ensure that doors are closing and sealing properly.
Building-in diagrams: K 1801 Vi
A) Niche Width : 762-765mm A) Niche Width : 762-765mm
84 85