Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions 5
- Guide to the appliance 14
- Caring for the environment 19
- Before using for the first time 20
- Induction 21
- Power level range 24
- Operation 25
- Tips on saving energy 31
- Timer 32
- Additional functions 35
- Safety features 36
- Cleaning and care 39
- Problem solving guide 41
- Optional accessories 44
- Safety instructions for installation 45
- Safety distances 46
- Hob with frame or bevelled edge 50
- Flush-fitted hobs 54
- Electrical connection 58
- After sales service, data plate 60

Problem Possible cause Remedy
A smell and vapours
are given off when a
new appliance is
being used.
The smell and vapours will
be less noticeable with
each subsequent use
before dissipating
completely.
The ß symbol flashes
alternately with the
power setting
selected in one of the
cooking zones.
There is no pan on the
cooking zone, or the pan is
unsuitable.
Use a suitable pan (see
"Pans").
After the hob is
switched on "LC"
appears in the timer
display for a few
seconds.
The system lock is
activated.
Deactivate the system lock
(see "Safety lock / System
lock").
A cooking zone
switches off
automatically.
It has been in use for too
long.
You can use the cooking
zone again by switching it
back on (see "Safety
switch-off").
The Booster has
deactivated early
automatically.
The overheating protection
mechanism has triggered.
See "Overheating
protection".
The cooking zone is
not working in the
usual way at the
power level set.
Power level 9 is
automatically reduced
if you select power
level 9 on two linked
cooking zones or
extended zones at the
same time.
Operating both zones at
power level 9 would
exceed the permitted
maximum power level for
the two zones.
Problem solving guide
42