Operating and Installation Instructions

Timer
38
Switching off a burner auto-
matically
You can set a time after which the
burner will switch off automatically. This
function can be used on all burners at
the same time.
If the programmed time is longer than
the maximum time allowed, the safety
shut-off function will turn off the
burner automatically when the maxi-
mum time has elapsed (see “Safety
shut-off”).
 Select a power level for the burner
you require.
 Keep touching the sensor control
until the indicator light for this burner
starts flashing.
If several burners are on, the indicator
lights flash in a clockwise direction,
starting with the front left.
 Set the required time.
 If you want to set another burner to
switch off automatically, follow the
same steps as described above.
If more than one switch-off time is
programmed, the shortest time left will
be displayed, and the corresponding
indicator light will flash. The other indi-
cator lights will light up constantly.
 If you want to show the time left for
another burner which is counting
down in the background, touch the
 sensor control repeatedly until the
indicator light for the burner you re-
quire flashes.