Operating Instructions and Installation Instructions

Induction
19
The induction principle
An induction coil is located under each
cooking zone. When a cooking zone is
switche
d on, this coil creates a magnet‐
ic field which impacts directly on the
base of the pan and heats it up. The
cooking zone itself is heated up indi‐
rectly by the heat given off by the pan.
An induction cooking zone only works
when a ferr
omagnetic pan is placed on
it (see "Pans"). The induction cooking
zone automatically recognises the size
of the pan.
The  symbol flash
es alternately with
the power setting selected in one of the
cooking zones
– if it is switched on without a pan in
place, or if the pan is unsuitable
(non-magnetic base).
– if the diameter of the base of the pan
is too small,
– if the pan is taken off the cooking
zone when it is switched on.
If a suitable pan is placed on the cook‐
ing
zone within 3 minutes, the  will go
out and you can continue as normal.
If no pan or an unsuitable pan is placed
on the cooking zone, the cooking zone
will switch off aut
omatically after 3 mi‐
nutes.
 When the appliance is switched
o
n either deliberately or by mistake,
or when there is residual heat
present, there is the risk of any metal
items placed on the hob (e.g. cutlery)
heating up.
Danger of burning.
Do not use the hob as a resting
place for it
ems. Switch the cooking
zones off after use with the appropri‐
ate sensor.