Operating Instructions and Installation Instructions

Operation
25
 Fir
e hazard.
Do not leave the hob unattended
whilst it is being used.
Plea
se note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.
Switching on
 T
ouch the  sensor.
 will appear in each of the cooking
zone displays. If there is no further in‐
put, the hob will switch itself off after a
few seconds for safety reasons.
Selecting/changing the power
level
 T
ouch the appropriate number sensor
for the power level you want.
The selected power level will appear in
the coo
king zone display.
Switching off
 T
o switch off a cooking zone, touch
the 0 sensor for that cooking zone.
 T
o switch off the hob and all the
cooking zones, touch the  sensor.
Residual heat indicator
If the cooking zone is still hot, the resid‐
ual he
at indicator will light up after it
has been switched off.
The lines of the residual heat indicator
go ou
t one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
 Danger of burning
. Do not touch
the cooking zones whilst the residual
heat indicators are lit up.