Operating Instructions and Installation Instructions

Additional functions
33
Stop&Go
When Stop&Go is activated, the power
of all co
oking zones in use is reduced
to power level 1.
The cooking zone power levels and the
timer settings cannot be altered and the
hob can only be switched off. A set mi‐
nute minder time, Booster time, Auto
heat-up and automatic switch-off times
set will be put on hold.
When Stop&Go is deactivated, the
cooking zones will operate at the power
level previously selected and all the
times will resume running.
If the function is not deactivated with‐
in 10 min
utes, the hob will switch off.
Activating / Deactivating
 T
ouch the  sensor.
Use this function when the sensors
need t
o be cleaned quickly or there is a
risk of boiling over.
Recall
If the hob is accidentally switched off
during use
, you can use this function to
restore all the settings. The hob must
be switched on again within 6 seconds.
 Switch the hob on again.
 T
ouch the  sensor within 6 sec‐
onds of switching back on.