Operating Instructions and Installation Instructions

Safety features
36
Overheating protection
All the induction coils and cooling ele‐
ments for the elec
tronics are fitted with
an overheating protection mechanism.
Before the induction coils or cooling el‐
ements get too hot, the overheating
protection mechanism cuts in in one of
the following ways:
– any booster function in operation will
be switched off.
– the set power level will be reduced.
– the cooking zone will switch off auto‐
matic
ally.  will flash in the display.
The overheating protection mechanism
can be trigge
red by:
– heating up an empty pan.
– fat or oil being heated on a high pow‐
er level.
– insufficient ventilation to the under‐
side of the hob.
– a hot cooking zone being switched
on
after an interruption to the power
supply.
If, despite removing the cause, the
overhe
ating protection mechanism trig‐
gers again, contact Miele Service.