Operating Instructions and Installation Instructions

Electrical connection
53
 Danger of inj
ury.
Miele cannot be held liable for unau‐
tho
rised installation, maintenance
and repair work as this can be dan‐
gerous to users.
Miele cannot be held liable for dam‐
age or injury caused by incorrect in‐
stallation, maintenance or repair
work, or by an inadequate or faulty
earthing system (e.g. electric shock).
This hob must be connected to the
mains electrical supply by a suitably
quali
fied and competent person, in
accordance with current local and
national safety regulations (BS 7671
in the UK).
After installation ensure that all elec‐
trica
l components are shielded and
cannot be accessed by users.
Connection
AC 230 V, 50 Hz
The connection data is quoted on the
datapla
te. It must match the household
supply.
Please see wiring diagram for connec‐
tion. (N.B. This appliance is supplied
sing
le phase only in the UK / AUS / NZ).
Residual current device
For extra safety, it is advisable to pro‐
t
ect the appliance with a suitable resid‐
ual current device (RCD) with a trip
range of 30 mA.
Separators
The appliance must be able to be dis‐
conn
ected from the mains on all poles
by disconnecting devices. When
switched off there must be an all-pole
contact gap of at least 3 mm in the iso‐
lator switch. Disconnecting devices in‐
clude overcurrent protection and circuit
breakers.