Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Before using for the first time
- Induction
- Tips on saving energy
- Setting ranges
- Operation
- Timer
- Additional functions
- Safety features
- Programming
- Note for test institutes
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- Product data sheets
Problem solving guide
54
Problem Cause and remedy
In the timer dis-
playflashes altern-
ately with numbers.
The overheating protection mechanism has been
activated.
See “Safety features – Overheating protection”.
, or
The fan is blocked or defective.
Make sure it has not been blocked by an object.
Remove the obstruction.
If this fault code continues to appear in the
display, contact the Customer Service
Department.
and other numbers
There is a fault in the electronic module.
Disconnect the power supply to the hob for
approx. 1minute.
If the problem persists after power has been
restored, please contact the Customer Service
Department.