Operating instructions/Installation instructions

Problem solving guide
52
Problem Cause and remedy
In the timer dis-
playflashes altern-
ately with numbers.

The overheating protection mechanism has been
activated.
 See “Safety features – Overheating protection”.
, or
The fan is blocked or defective.
 Make sure it has not been blocked by an object.
 Remove the obstruction.
 If this fault code continues to appear in the
display, contact the Customer Service
Department.
and other numbers
There is a fault in the electronic module.
 Disconnect the power supply to the hob for
approx. 1minute.
 If the problem persists after power has been
restored, please contact the Customer Service
Department.