Operating and Installation Instructions Gas cooktop To prevent accidents and machine damage, read the Operating Manual before installation or use. en - US M.-Nr.
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS ß Do not try to light any appliance. ß Do not touch any electrical switch. ß Do not use any phone in your building. ß Immediately call your gas supplier from a neighbor’s phone.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before the first use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Control knobs. . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS Correct usage WARNING - When using your gas appliance follow basic precautions, including the following: ~ This appliance is intended for use in This gas cooktop conforms to all uniform safety codes and regulations. residential purposes such as cooking and keeping food warm. Other uses are not permitted and can be dangerous. domestic households and in similar working and residential environments.
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with local building and safety codes. Work by unqualified persons could be dangerous and may void the warranty. ~ Before installing the cooktop, check for externally visible damage. Do not operate a damaged appliance. A damaged gas cooktop is a hazard. ~ Be certain your appliance is properly installed and grounded by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS Safety ~ The appliance is hot during use and remains so for some time after being switched off. Be careful not to touch the appliance if it may still be hot. ~ Do not store items on the appliance when not in use. Items could melt or catch fire from residual heat or if the appliance is turned on inadvertently. Always switch the burner(s) off after use. ~ Do not heat empty pots or pans. This may cause damage to the cookware and the surrounding area. Danger of fire.
IMPORTANT SAFETY INSTRUCTIONS ~ Only certain types of glass, ceramic or other glazed cookware are suitable for use on a cooktop without breaking due to the sudden temperature change. ~ Do not use containers made of plastic or aluminium. They may melt at high temperatures. ~ The burner grates supplied with the appliance must always be used. Never place a pan on the burner by itself. ~ Do not let cooking grease or other flammable materials accumulate on the appliance. Fire Hazard.
Description of the appliance Cooktop a Auxiliary burner Controls: b High-speed burner g Front left c Double-insert super burner h Back left d Normal burner i Middle e Normal burner j Back right f Grate (three pieces) k Front right 8
Description of the appliance Burners Double-insert super burner Auxiliary, normal and high-speed burners a Burner cap b Burner head a Outer burner cap b Inner burner cap c Burner head c Ignition safety device d Ignitor e Burner base d Burner base e Ignition safety device f Ignitor 9
Description of the appliance Standard accessories You can re-order standard accessories and optional accessories as needed. Wok ring The wok ring (supplied) is included for added stability, especially for woks with round bases. Trivet For small and large pans, see "Cookware".
Before the first use Cleaning the cooktop ^ Remove any protective films. ^ Wash the removable parts of the gas burner in a mild solution of warm water and liquid dish soap. ^ Dry and reassemble the parts in the correct order (see "Cleaning and care"). Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The harmless odor will dissipate after a short time and does not indicate a faulty connection or appliance defect.
Using the cooktop Double-insert super burner To turn the burner on, press and turn the knob toward the LEFT only. To turn the burner off, turn the knob to the RIGHT only. The outer burner of the double-insert super burner requires you to press the knob down while turning it in order to get from the high flame to the low flame zone. The appliance can be damaged if you: - turn the knob without pressing, - turn to the right to turn on, - turn to the left to turn off.
Using the cooktop Turning on ,Do not leave the appliance unattended whilst it is being used. ^ To light the burner, press the corresponding burner control knob and turn it to the left to the largest flame symbol. Pressing a burner control knob automatically generates a spark at all burners on the cooktop. This is normal and does not indicate a faulty appliance. Turning on in the event of a power failure If there is a power loss, you can ignite the flame manually, e.g. with a match.
Using the cooktop Regulating The inner and outer burners of the double-insert super burner are both controlled by one control knob. There is a stop at the 6 o’clock position that requires you to press the knob down while turning it in order to get from the high flame to the low flame zone. ^ To reduce the flames from a high to a low setting, turn the burner control knob counterclockwise until resistance is felt.
Cookware Pan size Pan placement – Select the cookware to match the burner: large diameter = large burner small diameter = small burner. – Always place the cookware on the grate. The cookware must not be placed directly on the burner. – Using oversized pans may cause the flames to spread out and damage the surrounding countertop or other countertop appliances. The proper pan size will also improve efficiency. – Position the cookware on the grate so that it cannot tip over.
Energy saving tips – If possible, cook in covered pots or pans. This prevents unnecessary heat loss. – Cook with less water. – The cooking time can be significantly reduced by using a pressure cooker. – After cooking or frying, promptly set to a lower flame. – Generally, wide / shallow pans will heat quicker and cook more evenly than narrow / tall ones.
Safety feature Ignition safety control The appliance is equipped with an Ignition safety control. This control cuts the gas supply if the flame goes out, e.g. from a boilover or a draft. Any further escape of gas is prevented. ^ To reignite the burner knob clockwise to "ß" and then turn it on as usual. The Ignition safety control works independently of the power supply. It is active if the appliance is in use during a power failure.
Cleaning and care ,Never use a steam cleaner to clean this cooktop. Pressurized steam could cause permanent damage to the surface and to components. Keep the ignitor in the burner dry. If it gets wet it will not spark. To better maintain your appliance avoid the following: – cleaners containing soda, ammonia, thinners, or chlorides, – cleaners containing descaling agents or lime removers, – stain and rust removers, – abrasive cleaners, – Clean the appliance after each use.
Cleaning and care Cleaning Tips Clean with a sponge and a mild solution of liquid dish soap and warm water. If necessary, use the rough side of the sponge and the Miele Ceramic and stainless steel cleaner. Make sure to only use the product in the direction of the grain. To keep the surfaces from quickly becoming soiled again, we recommend treatment with the Miele stainless steel care product. Using a soft cloth, apply the product in a thin, even layer.
Cleaning and care Auxiliary, normal and high-speed burners ^ Place the burner head b on to the burner base e so that the ignition safety device c and the ignitor d extend through their respective holes in the burner head. The burner head must click into place correctly. ^ Place burner cap a flat over burner head b. When correctly positioned it will not slide about.
Frequently asked questions ,Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. Problem Cause and solution The burner doesn't There might be air in the gas pipe. ignite when lit for the ^ Repeat lighting several times first time, or when it Wait at least 1 minute before attempting to reignite.
Frequently asked questions Problem Cause and solution Gas flame goes out after ignition. The flames don't reach the ignition safety device, it doesn't get hot enough. – The burner is assembled incorrectly. ^ Position the burner parts correctly. – The ignition safety device is soiled. ^ Remove the soiling. The shape of the gas The burner parts are not positioned correctly. flame varies ^ Position the burner parts correctly. The burner head or the flame holes are soiled. ^ Remove the soiling.
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the cooktop. MieleCare MieleCare, our Extended ServiceContract program; gives you the assurance of knowing that yourappliance investment is covered by 5 years of worry free ownership.
Technical Service Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Installation The minimum distances given in these Installation instructions are to combustible surfaces, and must be observed to ensure safe operation. Failure to do so increases the risk of fire. The cabinetry and venting hood should be installed first to prevent damage to the cooktop. ~ Gas appliances should only be installed in a well ventilated area.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances above the appliance If there are several appliances beneath a hood, and they have different minimum safety distances always observe the greatest distance. The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it. See the installation instructions of the hood for these safety measurements.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances When installing a gas cooktop, there may be cupboard or room walls of any size on the rear side and on one side (right or left) (see illustrations). The following minimum safety distances must be maintained: Not allowed a 2" (50 mm) minimum distance at the rear of the countertop cutout to the rear edge of the countertop. b 5 7/8" (150 mm) minimum distance to the right of the countertop cutout to an adjacent piece of furniture (e. g.
Installation dimensions a Appliance front b Installation height c Gas connection Please take careful note of the detailed diagrams for the cut-out dimensions in granite and marble countertops. dPower supply box with connection cable, L = 4 ft (1.
Installation The cooktop may be installed: Flush mounted gas cooktops are only suitable for installation in granite, marble, tiled or solid wood countertops. If installing into a countertop made from any other material, please check first with the countertop manufacturer that it is suitable for installing a flush mounted cooktop. This appliance requires a 36 7/16" (900 mm) wide base unit for installation.
Installation Granite and marble countertops ^ Make the countertop cut-out as shown in "Installation dimensions". Remember to maintain the minimum safety distances (see "IMPORTANT INSTALLATION SAFETY INSTRUCTIONS"). ^ Feed the power cord down through the cut-out. ^ Center the cooktop b in the cut-out. ^ Connect the cooktop to the mains (see "Electrical connection").
Installation Solid wood and tiled worktops ^ Make the countertop cut-out as shown in "Building-in dimensions". Remember to maintain the minimum safety distances (see "IMPORTANT INSTALLATION SAFETY INSTRUCTIONS"). ^ Fix the wooden frame d 1/16" (2 mm) below the top edge of the countertop (see diagram). ^ Feed the power cord down through the cut-out. a Countertop ^ Center the cooktop b in the cut-out. b Cooktop ^ Connect the cooktop to the mains (see "Electrical connection").
Securing the appliance Secure the appliance as shown, using the fixing brackets supplied. 3/4" (20 mm) countertop After installation Check that all the burners are operating correctly. The flame must not go out on the lowest setting, or when the control is turned quickly from a high to a low setting. On the highest setting, the flame must have a distinctive and visible core.
Electrical connection This appliance must be grounded according to local or national codes. All electrical work should be performed by a qualified electrician in accordance with local codes and with the: - National Electrical Code ANSI / NFPA No. 70 for the USA or - Canadian Electrical Code Part I for Canada (CSA Standard C 22.1). ,WARNING Disconnect the appliance from the main power supply before installation or service.
Electrical connection Wiring diagram ,Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.
Gas connection Installation and service must be performed by a qualified installer, service agency or gas supplier. The gas connection must be made in accordance with local codes or, in the absence of local codes, with In Massachusetts installation must be performed by a licensed plumber/gas fitter. - This appliance must be installed with its own shut off valve and the included gas pressure regulator.
Gas connection Gas pressure regulator A pressure regulator that is convertible from natural to LP gas (Propane) or vice versa is included with the appliance. The included regulator corresponds with the gas type of the appliance. Verify before installing. The adjusted pressure is: natural gas - 4" w.c. LP gas - 10" w.c. For convenience, an AGA or CGA approved flexible stainless steel gas hose (accordion type) may be used between the gas connection and the regulator.
Conversion to another type of gas The applinace should have been ordered for connection to either natural gas or LP gas (propane). If the appliance is not configured for the proper type of gas connection please contact your Miele Dealer.
Burner performance Rated load at high setting Burner Type of gas KM 2355 BTU/hr kW Auxiliary burner Natural gas (NG) Liquid gas (LP) 3,900 3,000 1.14 0.88 Normal burner Natural gas (NG) Liquid gas (LP) 5,900 6,000 1.73 1.76 High-speed burner Natural gas (NG) Liquid gas (LP) 9,800 9,500 2.87 2.78 Double-insert super burner Natural gas (NG) Liquid gas (LP) 13,000 15,000 3.81 4.40 Total Natural gas (NG) Liquid gas (LP) 38,500 39,500 11.3 11.
Help protect our environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Old appliances contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
KM 2355 en - US M.-Nr.
