Operating and Installation Instructions Gas Cooktop To prevent accidents and machine damage, read the Operating Manual before installation or use. en - US, CA M.-Nr.
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS ß Do not try to light any appliance. ß Do not touch any electrical switch. ß Do not use any phone in your building. ß Immediately call your gas supplier from a neighbor’s phone.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Timer display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Burner . . . . . . . . . . . . . . . . . .
Contents Technical Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . 34 Installation dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Electrical connection . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS Correct usage WARNING - When using your gas appliance follow basic precautions, including the following: ~ This appliance is intended for use in This gas cooktop conforms to all uniform safety codes and regulations. residential purposes such as cooking and keeping food warm. Other uses are not permitted and can be dangerous. ~ Only use this gas cooktop for Read all instructions before installation or use to prevent injury and appliance damage.
IMPORTANT SAFETY INSTRUCTIONS Children Technical safety ~ Use the Safety Lock to prevent the cooktop from being turned on. ~ Installation, repair and maintenance ~ Children should not be left unattended in an area where the appliance is in use. Never allow children to sit or stand on any part of the appliance. Caution: Do not store items of interest to children in cabinets above the appliance. Children climbing on the appliance to reach these items could be injured.
IMPORTANT SAFETY INSTRUCTIONS ~ Before servicing, turn off the gas valve and disconnect the power supply by either removing the fuse, unplugging the unit or manually "tripping" the circuit breaker. ~ While the appliance is under warranty repairs should only be performed by a Miele authorized service technician. Otherwise the warranty is void. ~ Defective components should be replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.
IMPORTANT SAFETY INSTRUCTIONS ~ Do not flambé under an exhaust hood. Flames could be drawn up into the hood by the suction or the grease filters may ignite. ~ Be careful not to drop anything on the ceramic surface. Even lightweight objects may cause damage. ~ Do not store items on the appliance when not in use. Items could melt or catch fire from residual heat or if the appliance is turned on inadvertently. Always switch the burner(s) off after use.
IMPORTANT SAFETY INSTRUCTIONS ~ Do not use roasting pans, frying pans or grill stones large enough to cover several burners. The resulting heat accumulation can damage the appliance. ~ If the gas cooktop is installed behind a cabinet door, it must only be used with the door open. Only close the cabinet door when the appliance is switched off.
Appliance description Cooktop a Wok burner Control knob b Fast burner g Front right burner c Auxiliary burner h Rear right burner de Normal burner i Rear left burner f Grates (for each burner) j Front left burner k Left burner l Burner symbol m Operating/Residual heat indicator n Timer o Quick switch-off 11
Appliance description Standard accessories You can re-order standard accessories and optional accessories as needed (see the section on "Optional accessories"). Wok ring The wok ring (supplied) is included for added stability, especially for woks with round bases. Combi insert For small and large pans, see "Cookware".
Appliance description Timer display a Safety lock / Setting the time b Touch controls - Select timer - Switch between the functions - Select a burner c Indicator light for the timer d Indicator light for timer burner assignment, e. g. the rear right burner e Time display 00 to 99 = time in minutes 0.^ to 6.
Appliance description Burner Wok burner a Outer burner cover b Inner burner cover c Burner head d Burner base e Ignition safety control (Thermocouple) fIgnitor Auxiliary, normal, fast burners a Burner cover b Burner head c Burner base d Ignition safety control (Thermocouple) e Ignitor 14
Before the first use Cleaning the cooktop ^ Remove any protective films. ^ Wash the removable parts of the gas burner in a mild solution of warm water and liquid dish soap. ^ Dry and reassemble the parts in the correct order (see "Cleaning and care"). ^ Wipe the cooktop with a damp cloth and dry thoroughly. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated.
Operation Fast-Ignition system The appliance is equipped with a quick ignition system with the following features: – The control knob can be released once it is turned to the largest flame symbol. – If the flame goes out during use, e.g. from a draft, the burner will automatically reignite. If reignition is unsuccessful, the gas supply will automatically be shut-off (see "Ignition safety control). Control knobs The control knob is used to turn on the burner and to regulate the strength of the flame.
Operation Turning on When using the gas cooktop, an exhaust air extractor hood or a room ventilation device (not recirculation) must be used. ^ To light the burner, press the corresponding burner control knob and turn it anti-clockwise to the largest flame symbol. The ignition electrode "clicks" and ignites the gas. Pressing a burner control knob automatically generates a spark at all burners on the cooktop. This is normal and does not indicate a faulty appliance.
Operation Regulating The flame should be regulated so that it never protrudes beyond the pot. Since the outer part of the gas flame is much hotter than the center of the flame, the flame tips should remain under the base of the pot. Protruding flame tips give off unnecessary heat into the air and can damage pot handles and increase the risk of burning. The burner can be continuously regulated between the highest and lowest flame. Switching off ^ Turn the burner control knob clockwise to "ß".
Operation Quick turn-off All active burners are turned off by pressing the quick turn-off f touch key. ^ Touch the f touch key. The operating/residual heat indicator of the active burners flashes. Any set short time continues to run down if it is not assigned to a burner. If the short time is assigned to a burner, it is canceled. The quick switch-off pilot light stays lit until all active burner knobs are turned to "ß".
Timer You can set a time from 1 minute (01) to 6 (6^) hours For a time of more than 99 minutes (99), the setting is made in half-hour steps. The half hours are indicated by a dot behind the digit. The - touch key reduces the time from 6^ to 00, the + touch key increases the time from 00 to 6^. There is a stop at 2h or 99. To continue with the setting, briefly take your finger off the touch key and then touch it again.
Timer Assigning a timer to a burner You can set a timer for each active burner. All burners can be programmed at the same time. ^ Turn on the desired burner. ^ Press the touch key m. 00 flashes on the display and the timer indicator light. ^ Press the m touch key again. The indicator light of the tiner goes out on the display and a indicator light for the burner assignment flashes.
Cookware – Select the cookware to match the burner: large diameter = large burner small diameter = small burner. – Using oversized pans may cause the flames to spread out and damage the surrounding countertop or other countertop appliances. The proper pan size will also improve efficiency. – Pots with a smaller diameter than the pan support and pots that do not sit securely (without wobbling) are hazardous and should not be used.
Cookware Wok ring For added stability, especially for woks with round bases, use the wok ring (supplied). Make sure the wok ring is positioned correctly so that it sits securely and cannot shift. (See illustration.) Combi insert The combi insert must be used on the wok burner, if you use – very small cookware. It sits securely and cannot tip over. – very large cookware. Using the insert will prevent the flames spreading and discoloring the cooktop and damaging the surrounding countertop.
Energy saving tips – If possible, cook in covered pots or pans. This prevents unnecessary heat loss. – Cook with less water. – The cooking time can be significantly reduced by using a pressure cooker. – After cooking or frying, promptly set to a lower flame. – Generally, wide / shallow pans will heat quicker and cook more evenly than narrow / tall ones.
Safety devices Ignition safety control Your gas cooktop is equipped with an Ignition safety control. This means that if the gas flame goes out, e.g. from a boilover or a draft. If an attempt to reignite fails, the gas supply shuts off. Any further escape of gas is prevented. ^ To reignite the burner turn the knob clockwise to "ß" and then turn it on as usual. Safety turn-off If a burner is heated for an unusually long time (approx. 6 hours), it turns off automatically.
Cleaning and care ,Never use a steam cleaner to clean this cooktop. Pressurized steam could cause permanent damage to the surface and to components. Do not use any sharp or pointed objects which could damage the seal between the frame and the countertop. Keep the ignitor in the burner dry. If it gets wet it will not spark. Dry your cooktop thoroughly after cleaning it to prevent lime deposits. Spills containing salt or sugar should be cleaned immediately.
Cleaning and care Cleaning Ceramic surfaces Instructions Remove heavy dirt with a damp cloth and stubborn Do not use liquid dish soap as not all soiling and dirt with a glass scraper. residue will be removed. Clean with the Miele ceramic surface and stainless This results in an invisible film which causes steel cleaner (see the Miele online store) and with discoloration of the glass kitchen paper or a clean cloth. ceramic. This discoloration Do not apply cleaner to a hot cooktop as this can is permanent.
Cleaning and care Assembling the burners Auxiliary, normal and fast burners ^ Place the burner head b on the burner base c so that the thermocouple d and the ignitor e feed through the holes of the burner head. The burner head must engage properly. ^ Lay the burner cap a flat on the burner ring b. The burner cap cannot shift if positioned correctly. Make sure the burner parts are assembled in the right order.
Cleaning and care Wok burner ^ Place the burner head c on the burner base d so that the thermocouple e and the igintor f feed through the hole of the burner head. The burner head must engage properly. ^ Place on the burner caps ab. Make sure the burner parts are assembled in the right order.
Frequently asked questions ,Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. Problem Cause Solution The burner does not ignite when used for the first time or after not being used for a longer period. There may be air in the gas line. Repeat the ignition process several times if necessary.
Frequently asked questions Problem Cause Solution The burner ignitor The circuit breaker has Restore power. is not working tripped. If lack of power is the problem, the cooktop can be lit with a match. See “Turning on in the event of a power failure”. There is food residue between the ignitor and Clean carefully (see "Cleaning and care"). the burner cover. One of the following error messages appears on the timer display: LC The start-up lock is activated.
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the cooktop. MieleCare MieleCare, our Extended ServiceContract program; gives you the assurance of knowing that yourappliance investment is covered by 5 years of worry free ownership.
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Installation The minimum distances given in these Installation instructions are to combustible surfaces, and must be observed to ensure safe operation. Failure to do so increases the risk of fire. The cabinetry and venting hood should be installed first to prevent damage to the cooktop. ~ Gas appliances should only be installed in a well ventilated area.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the cooktop (e.g. cabinets, utensil rail, etc.), a minimum safety distance of 30" (760 mm) must be maintained.
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances When installing a gas cooktop, there may be cupboard or room walls of any height on the rear side and on one side (right or left) (see illustrations). The minimum following safety distances must be maintained: Not allowed a 2" (50 mm) rear minimum distance from the countertop cut-out to the countertop rear edge. b 5 7/8" (150 mm) right minimum distance from the countertop cut-out to an adjacent piece of furniture (e. g.
Installation dimensions a Appliance front b Installation height c Power supply box with connection cable L = 4 ft (1.
Installation ^ Create the countertop cutout as per the dimension drawing. Remember to maintain a minimum safety distance from the back wall, as well as from any tall unit or side wall to the right or left of the cooktop (see "IMPORTANT INSTALLATION SAFETY INSTRUCTIONS"). ^ Secure the appliance in place with the supplied brackets a. ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture. The materials used must be heat-resistant.
Installation Sealing The sealing strip under the edge of the top part of the cooktop provides a sufficient seal for the countertop. Do not let sealant get in between the cooktop frame and the countertop. This could cause difficulties if the cooktop ever needs to be taken out for servicing and possibly result in damage to the cooktop frame or the countertop.
Electrical connection This appliance must be grounded according to local or national codes. All electrical work should be performed by a qualified electrician in accordance with local codes and with the: - National Electrical Code ANSI / NFPA No. 70 for the USA or - Canadian Electrical Code Part I for Canada (CSA Standard C 22.1). ,WARNING Disconnect the appliance from the main power supply before installation or service.
Electrical connection Wiring diagram ,Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.
Gas connection Installation and service must be performed by a qualified installer, service agency or gas supplier. The gas connection must be made in accordance with local codes or, in the absence of local codes, with In Massachusetts installation must be performed by a licensed plumber/gas fitter. - This appliance must be installed with its own shut off valve and the included gas pressure regulator.
Gas connection Gas pressure regulator A pressure regulator that is convertible from natural to LP gas (Propane) or vice versa is included with the appliance. The included regulator corresponds with the gas type of the appliance. Verify before installing. The adjusted pressure is: natural gas - 4" w.c. LP gas - 10" w.c. For convenience, an AGA or CGA approved flexible stainless steel gas hose (accordion type) may be used between the gas connection and the regulator.
Conversion to another type of gas The applinace should have been ordered for connection to either natural gas or LP gas (propane). If the appliance is not configured for the proper type of gas connection please contact your Miele Dealer.
Burner capacity Nominal ratings Maximum output Gas type BTU/hr kW Auxiliary burner Natural Gas (NG) Propane (LP) 3,750 3,300 1.10 0.97 Normal burner Natural Gas (NG) Propane (LP) 5,800 6,400 1.70 1.88 Fast burner Natural Gas (NG) Propane (LP) 9,300 9,800 2.73 2.87 Wok Burner Natural Gas (NG) Propane (LP) 16,500 15,000 4.84 4.40 Total output Natural Gas (NG) Propane (LP) 41,150 40,900 12.10 12.
Help protect our environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Old appliances contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
KM 3054 en - US, CA M.-Nr.