Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 6
- Appliance description 11
- Before the first use 15
- Operation 16
- Timer 20
- Cookware 22
- Energy saving tips 24
- Safety devices 25
- Cleaning and care 26
- Frequently asked questions 30
- Technical Service 32
- IMPORTANT INSTALLATION SAFETY INSTRUCTIONS 34
- Installation dimensions 37
- Installation 38
- Electrical connection 40
- Gas connection 42
- Conversion to another type of gas 44
- Burner capacity 45
- Help protect our environment 46
Children
~
Use the Safety Lock to prevent the
cooktop from being turned on.
~
Children should not be left
unattended in an area where the
appliance is in use. Never allow
children to sit or stand on any part of
the appliance.
Caution: Do not store items of interest
to children in cabinets above the
appliance. Children climbing on the
appliance to reach these items could
be injured.
~
The appliance is hot during use and
remains so for some time after being
switched off. Keep children away from
the appliance.
~
Keep all pots and pans out of the
reach of children. Danger of burning or
scalding.
~
Ensure that any packing material, is
disposed of safely and kept out of the
reach of children. Danger of
suffocation!
Technical safety
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician in
accordance with local building and
safety codes. Work by unqualified
persons could be dangerous and may
void the warranty.
~
Before installing the cooktop, check
for externally visible damage. Do not
operate a damaged appliance. A
damaged gas cooktop is a hazard.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician.
~
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
~
Before installation, make sure that
the voltage and frequency listed on the
rating label correspond with the
household electrical supply. This data
must correspond to prevent injury and
appliance damage. Consult a qualified
electrician if in doubt.
~
Do not operate the appliance until it
has been properly installed in the
countertop.
~
Under no circumstance open the
outer casing of the appliance. This is a
safety hazard and may damage the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
7