Manual

Timer
35
The cooktop has to be turned on if
you wish t
o use the timer.
You can set a time between 1 minute
() and 9 hours (.).
The timer can be used for two different
functions:
– For setting the timer
– For turning off a cooking zone auto‐
matic
ally.
A time up to 99 minutes is set and dis‐
played in minut
es.
In case of a time of more than 99 mi‐
nut
es, the timer must be switched to
hours (h). The time is set in half-hour
steps. Half-hours are indicated by a dot
following the number, for example, 2 h
30 min:
h
Timer
Setting the minutes
Example: You want to set a time of 15
minu
tes.
 T
urn the cooktop on.
 T
ap the  sensor button.
The  senso
r button flashes.  ap‐
pears in the timer display, and the right
 flashes.
First the tens digit is set then the units
digit.
 T
ap the sensor button on the control
scale that corresponds to the tens
position (1 in this case).
The timer display will change and  will
star
t flashing on the right.
 T
ap the sensor button on the control
scale that corresponds to the ones
position (5 in this case).
The timer display will change.  jumps
t
o the left and  appears on the right.
After several seconds, the  sensor
butt
on and timer display light up con‐
stantly. The timer starts to count down.