Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Induction
- Energy saving tips
- Power setting ranges
- Operation
- Timer
- Additional functions
- Safety features
- Cleaning and care
- Programming
- Frequently Asked Questions
- Con ctivity
- Customer Service
- Installation
- MieleCare
Installation
*INSTALLATION*
71
Connection
Ensure that the connection data on
the data plate (voltage, frequency,
and fuse rating) match those of your
electrical supply.
The data plate is located underneath
the cooktop.
The cooktop is approved and ready for
connection to a grounded connector
with three connecting wires, sheathed
by a flexible metal hose.
It must be connected to an assigned
line in an approved connecting socket.
The appliance must be able to be dis-
connected from the power supply on all
poles by disconnecting devices! (When
turned off, a contact distance of at least
¹/₈" (3mm must be present!) The dis-
connecting devices are overcurrent pro-
tection elements and protective circuit
breakers.
Black: Connect to L1 (hot)
Red: Connect to L2 (hot)
Green: Connect to GND (ground)
KM6360, KM6365
208/240V, 60Hz, 40A
KM6370, KM6375, KM6377
208/240V, 60Hz, 50A
Make sure that the connecting socket is
accessible after the installation of the
cooktop.
Further information can be found on the
included data plate.
WARNING:
THIS COOKTOP MUST BE
GROUNDED