Operating/Installation Instructions
Operation
28
Basic operation
The glass ceramic cooking zone is
equipped with electronic sensor but-
tons that react to finger contact. During
activation, the On/Off sensor button
must be pressed somewhat longer than
the other buttons for safety reasons.
Each reaction of the buttons is ac-
knowledged with an acoustic signal.
When the cooktop is turned off, only the
pressed symbols for the On/Off and
System Lock/Safety Lock sensor
buttons are visible. When you switch on
the cooktop, all other sensor buttons
light up. When you turn on the cooking
zone, the sensor button lights up in
brightness level 2, and the through
sensor buttons light up in brightness
level1.
When you set a power level, the sen-
sor buttons light up to the set power
stage in brightness level 2.
If the booster or keep warm function is
set, the corresponding sensor button
lights up in brightness level2.
Malfunction due to dirty and/or cov-
ered sensor buttons
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the cook top (see
"Safety switch-off"). Hot cookware
on the sensor buttons/indicator lights
can damage the connected elec-
tronic module.
Keep the sensor buttons and indica-
tor lights clean, do not place any ob-
jects on them, and do not put hot
cookware on them.