Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the Rangetop
- Control panel
- Before first use
- Operation of the burners
- Cookware
- Energy saving tips
- Operation of the grill
- Operation of the griddle
- Cleaning and care
- Frequently Asked Questions
- Notes on installation
- Dimensional drawings
- Electrical connection
- Gas connection
- Burner ratings
- Customer Service
- Caring for the environment
Notes on installation
*INSTALLATION*
36
Distance to the range hood
The minimum clearance between the
appliance and a range hood above will
be listed by the hood manufacturer.
If there is more than one appliance
installed below the range hood, each
with a different safety clearance, the
largest clearance must be used.
RBGDF Backguard
Depending on the model, you can
exchange the existing island trim of
your appliance for a larger range
backguard. The backguard is available
in the following heights: 12“ (305 mm)
and 20” (508 mm).
Installing the backguard
The rear of the rangetop must be
accessible.
Install the backguard before
connecting the rangetop.
Loosen the screws of the island trim.
Pull back the island trim slightly until
it can be removed.
The backguard can be installed in
reverse order.