Operating and Installation instructions

Switching on and off
21
Before first use
Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective film
The stainless steel trim on the interior
shelves and door shelves in the appli-
ance has a layer of protective film to
prevent scratching in transit.
 Remove this protective film once the
appliance has been installed.
Cleaning the refrigerator
Please refer to the relevant instruc-
tions in “Cleaning and care”.
 Clean the inside of the appliance and
the accessories.
Operating the appliance
A light touch on the sensors is all that is
required to operate this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this if you
wish (see “Selecting additional settings
- Audible signals”).
Switching on the appliance
Once the appliance is connected to the
electricity supply, the power supply
symbol  will soon appear on the dis-
play.
 Touch the On/Off button.
The power connection symbol goes
out and the temperature appears in the
display.
The appliance starts cooling.
When the door is opened, the interior
lighting comes on and the LED lighting
on the shelves becomes brighter until it
reaches its maximum brightness.
To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it.