Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
The correct temperature
25
Adjusting the temperature in
the PerfectFresh zone
In the PerfectFresh zone, the tempera-
ture is automatically maintained be-
tween32°F (0°C) and37°F (3°C). How-
ever, if you would like it to be warmer or
colder, e.g., when storing fish, you can
adjust the temperature slightly.
The default setting for the tempera-
ture in the PerfectFresh zone is5.
Under certain circumstances, a set-
ting from1 to4 can cause negative
temperatures to be reached. This can
cause food to freeze.
Touch the settings button.
All symbols available for selection will
appear on the display and the sym-
bol will flash.
Touch the buttons for setting the tem-
perature ( or ) repeatedly until the
symbol flashes on the display.
Touch the OK button to confirm the
selection.
The most recently selected setting
flashes and the symbol lights up in
the display.
You can now adjust the temperature
in the PerfectFresh zone by touching
the or button. You can choose
from settings 1to9:
1: lowest temperature,
9: highest temperature.
Touch the OK button to confirm the
selection.
The selected setting is applied; the
symbol flashes.
Touch the settings button to exit Set-
tings mode.
If you do not do this, the appliance
electronics will exit Settings mode
automatically after approximately one
minute.
The newly set temperature for the Per-
fectFresh zone will gradually be
reached.