Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Selecting additional settings
28
Certain settings for the appliance can
only be selected in settings mode.
While you are in settings mode, the
door alarm and any other fault mes-
sages are suppressed automatically,
but the alarm symbol lights up on
the display.
Available settings
Activate and deactivate the
safety lock
°C
°F
Select the temperature unit
(Celsius or Fahrenheit)
Switch audible signals on/off
Change the brightness of the
display
Adjust the temperature in the
PerfectFresh zone
Switch Sabbath mode on/off
Replace the carbon filters (Ac-
tive AirClean)
The process of adjusting the tempera-
ture in the PerfectFresh zone is de-
scribed in “The correct temperature”.
All other available settings are de-
scribed below.
Safety lock
The safety lock can be activated to pre-
vent:
- the appliance being switched off by
mistake,
- the temperature being changed by
mistake,
- Automatic SuperCool being selected
by mistake,
- settings being adjusted by mistake (it
is only possible to deactivate the
safety lock).
This prevents the appliance being
switched off or settings adjusted with-
out your knowledge; for example, by
children.
Activating and deactivating the safety
lock
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the symbol lights up in the display.