Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Defrosting
44
WARNING! DANGER of injury
and damage!
Do not use any mechanical or other
types of aids which are not recom-
mended by the manufacturer to ac-
celerate the defrosting process.
Refrigerator section and
PerfectFresh zone
The refrigerator section and the Perfect-
Fresh zone defrost automatically.
Condensate and ice can build up on the
back wall of the refrigerator section and
the PerfectFresh zone while the com-
pressor is running. You do not need to
remove this, as it will defrost and evap-
orate automatically with the warmth
generated by the compressor.
The condensate drains through a chan-
nel and drain pipe into an evaporation
system at the back of the appliance.
The condensate must always be
able to drain properly.
Keep the condensate channel and
drain hole clean to enable this.