Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Cleaning and care
47
Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its rearmost point.
1. Pull the plastic surround from the
shelf and
2. pull the trim off at the same time.
Then do the same on the opposite
side.
3. Then pull the protective strip off.
After cleaning, reattach the stainless
steel trim/protective strip by following
the same procedure in reverse.
Door shelves and bottle shelves
The stainless steel trim on the bottle
and door shelves is not suitable for
dishwashers!
To remove the stainless steel trim, pro-
ceed as follows:
Place the door/bottle shelf with the
front side on the work surface.
Take hold of one end of the trim and
pull it off the shelf. The entire section
of stainless steel trim will now come
off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.