Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Frequently Asked Questions
55
Messages in the display
Message Possible cause and solution
The alarm symbol
lights up in the display
and an alarm tone
sounds.
The door alarm has been activated.
Close the appliance door. The alarm symbol
will go out, and the alarm tone will stop.
The symbol lights up
in the display. You can-
not switch the appli-
ance off.
The safety lock has been activated.
Completely deactivate the safety lock (see “Select-
ing additional settings”, section “Activating and de-
activating the safety lock”).
lights up in the dis-
play.
The Replace carbon filter reminder setting has
been activated. This is the reminder to change the fil-
ter (Active AirClean).
Replace the carbon filter in the holder (see “Clean-
ing and maintenance - Replacing the filter”).
Reset the counter (see “Selecting further settings –
Carbon filter replacement indicator”).
“F0toF9” appears in
the display.
There is a fault.
Contact Miele Technical Service.