Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Frequently Asked Questions
58
Problem Possible cause and solution
The LED lighting is not
working on any of the
shelves.
Liquid has come into contact with the LED lighting on
a shelf or the metal contacts in the left-hand shelf
supports.
The safety shut-off mechanism has switched off the
LED lighting on all the shelves.
Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the ap-
pliance to dry. Clean the metal contacts in the
shelf supports in the same way.
Ensure that the contacts are clean and dry before
replacing the shelves with LED lighting.
Push in the shelf until it clicks into position.
Close the appliance door.
When the door is opened again, the interior lighting
will come on.
If this does not happen, there is a fault.
Contact Customer Service.