Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Information for dealers
62
Demo mode
The appliance can be demonstrated in
the showroom or at exhibitions in
“Demo mode”. In this mode, the control
panel and interior lighting are active but
the compressor remains off.
Turning on demo mode
Switch the appliance off by touching
the On/Off button.
If this does not work, the safety lock
is activated.
The temperature shown on the display
will go out and the power connection
symbol appears.
Touch and hold the button.
At the same time, briefly touch the
on/off button (without letting go of
the button!).
Keep your finger on the button un-
til the symbol appears on the dis-
play.
Release the button.
Demo mode is on and the symbol is
illuminated on the display.