Operating and Installation instructions

Installation
*INSTALLATION*
70
Limiting the opening angle of
the appliance door
The door hinges are set to enable the
appliance door to be opened wide.
However, if the opening angle of the
door needs to be limited for any reason,
the hinge can be adjusted to accommo-
date this.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°.
The locking pins for limiting the door
opening must be fitted before the ap-
pliance is installed.
 Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The door opening angle is now limited
to approx. 90°.
Changing the door hinging
Always change the door hinging with
the assistance of another person.
The appliance is supplied with right-
hand hinging. If left-hand hinging is re-
quired, the hinges must be changed:
To change the door hinging, you will
need the following tools:
 Open the appliance door.
 Remove the adjustable shelves/bottle
shelf from the appliance door.
 Lift off the covers: , , and .