Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Installation
*INSTALLATION*
72
Removing the soft-close mechanism
Warning! The soft-close mecha-
nism folds in when dismantled!
Danger of injury!
Place the door on a stable surface
with the front facing down.
Remove the soft-close mechanism
from the ball joint.
Unscrew the mount and pull the
soft-close mechanism toward you
and off.
Using a screwdriver, remove the ball
joint and screw it into the adjacent
hole.
Now turn over the appliance door so
that the front is facing up (hinges re-
main open).
Danger of injury!
Do not close the hinges.
Remove the screws .
Replace the hinges in their diagonally
opposite corners.