Operating and Installation instructions

Installation
*INSTALLATION*
79
 Now push the appliance into the
niche until all fixing brackets at the
top and bottom are touching the front
edge of the cabinet side wall.
- 5/8" (16mm) thick walls:
The spacers should touch the front
edge of the cabinet side walls at the
top and bottom.
- 3/4" (19mm) thick walls:
The front edges of the top and bot-
tom hinges should be flush with the
front edge of the cabinet side wall.
This ensures a distance of
15/8" (42mm) to the front edges of the
cabinet unit side walls all the way
round.
Important for cabinetry with door fit-
tings (such as stubs and seals).
Take the dimensions of the fittings
into account.
Check to make sure there is a gap all
round of 15/8" (42mm) to the front
edges of the door fittings.
 Pull the appliance forward by the ap-
propriate dimension.
Tip: If possible, remove the door fittings
and push the appliance into the niche
until all securing brackets at the top and
bottom are touching the front edge of
the cabinet side wall.
 Align the appliance on both sides via
the adjustable feet so that it stands
level.