Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Installation
*INSTALLATION*
83
Place the cabinet door on a stable
surface with the outer side facing
downward.
Draw a faint central line with a pencil
on the inside of the cabinet door.
Hang the mounting frame with the
installation aids on the inside of the
cabinet door. Align the mounting
frame centrally.
Attach the mounting frame securely
using at least 6 short chipboard
screws. (On raised paneled doors,
only use 4 screws on the edges.) Pre-
drill holes into the cabinet door if nec-
essary.
Pull the installation aids upward to re-
move them.
Turn them around and push them all
the way into the middle slots on the
mounting frame for safekeeping.
Attach the side cover to the
mounting frame on the side opposite
the hinge.
Turn the cabinet door over and attach
the handle (if required).