Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Storing food in the PerfectFresh zone
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Information for dealers
- Installation
- Installation
- Installation dimensions
- Limiting the opening angle of the appliance door
- Changing the door hinging
- Building in the appliance
- Preparing the appliance
- With 5/8" (16 mm) thick cabinet walls only:
- Building in the appliance
- Securing the appliance in the niche
- Only for an appliance with a niche height greater than 55" (140 cm)
- Installing the cabinet door
- Adjusting the position of the door
- X: side adjustments
- Y: height adjustment
- Z: depth adjustment
- Electrical connection
Installation
*INSTALLATION*
84
Open the appliance door.
Hang the cabinet door on the adjust-
ing bolts.
Screw the nuts loosely onto the
adjusting bolts.
Close the door and check the dis-
tance between the door and adjacent
cabinet doors. The distance should
be the same.
Adjusting the position of the door
Check the distance between the door
and adjacent cabinet doors. The dis-
tance should be the same.
X: side adjustments
Move the cabinet door.
Y: height adjustment
The distance between the appliance
door and the mounting frame is set to
5/16" (8mm). Only adjust the distance
within the specified range.
Turn the adjusting bolts with a
screwdriver.