Operating and installation instructions Wine storage unit KWL 1090 S KWL 1630 S KWL 1900 S It is essential to read these operating instructions before installing or using the machine, to avoid the risk of accident or damage to the machine. G M.-Nr.
Contents Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety lock . . . . . . . . . . . . . . . . .
Contents After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Location . . . . . . . . . .
Description of the appliance a Safety lock indicator light d On/Off button b Temperature display e Locking button c Controls for setting the temperature upper button: warmer lower button: colder f Alarm button g Interior lighting k Condensate channel and drain hole h Wooden décor strip for descriptive labels i Shelves j Lock 4 l Active charcoal filter m Grille (secured to one of the shelves during transportation)
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Rather than just throwing these materials away, please ensure they are offered for recycling. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Warning and safety instructions Technical safety This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. Before installation and before using for the first time, read the operating instructions carefully. They contain important notes on safety, the operation and care of the appliance. This way you will avoid the risk of accidents and damage to the appliance.
Warning and safety instructions The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system which complies with local and national safety regulations. It is most important that this basic safety requirement is tested by a qualified electrician. Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance. (e.g.
Warning and safety instructions In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the appliance guarantee. Disposal of old appliances Before disposing of an old appliance first make the door latch or lock unusable.
Operation Before using for the first time Switching off ^ Clean the inside of the appliance and the accessories with warm water and a little washing up liquid and then dry with a soft cloth. ^ Press the On-Off button. Important: To ensure correct functioning of the appliance, let it stand for between ½ and 1 hour after transporting it to its final location before connecting it to the mains. The temperature display goes out and the cooling process is switched off.
The correct temperature and humidity Temperature Temperature selection Wine can be stored at a temperature of between 5 and 18 °C. The optimum temperature is around 10 - 12 °C. Most white wines can be consumed at this temperature. It is best to take red wine out of the storage unit approximately two hours before drinking. Open the wine to allow it to breathe and to develop its aroma. After two hours red wine will be at the correct temperature for drinking.
The correct temperature and humidity If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display as it will take this long for the display to show the accurate temperature of the unit. If the temperature displayed is too low or too high, then adjust the temperature once more.
The correct temperature and humidity Air filtering with the active charcoal filter and dynamic cooling Wine keeps on maturing, depending on the surrounding conditions. The length of time for which wine can be kept in good condition will therefore depend not only on the temperature but also the air quality. The active charcoal filter and dynamic cooling system maintain the air quality in the appliance.
Storing wine bottles Any vibration or movement of the bottle can affect the wine by interrupting the natural respiration process and so impairing the taste. As far as possible store bottles of the same type of wine beside each other on the same shelf. Removing a bottle of one type will then leave the other types undisturbed and will avoid the need to move different bottles around. Shelves The shelves can support a maximum load of up to 50 kg .
Alarm Your appliance has been fitted with a warning system which ensures that the temperature cannot rise or fall unnoticed and impair the wine. The alarm system is always active. It does not need to be activated separately. Temperature alarm Switching the alarm tone off early Once the set temperature has been reached in the appliance the alarm tone stops and the temperature is displayed constantly. However, if the noise disturbs you, you can switch the alarm tone off before this if you wish.
Defrosting Condensate and frost can build up on the back wall of the appliance whilst it is in use. These are automatically removed and defrosted by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the back of the appliance. Ensure that the condensate channel and drain hole are never blocked so that condensate can flow away without hindrance.
Cleaning and care Never use cleaning agents containing abrasive substances such as sand, soda, acids or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear. Make sure that no water can penetrate into the electronic unit or into the light. Do not let water get into the drainage channel and drain hole when cleaning. Never use steam cleaning apparatus to clean the appliance. The steam could attack the electrical components and cause a short circuit.
Cleaning and care Door seals Do not use any oils or grease on the door seals as these will cause the seals to deteriorate and become porous with time. The door seals should be cleaned regularly with clean water and then wiped dry with a soft cloth. Metal grille at the back of the appliance The metal grille at the back of the appliance (heat exchanger) should be dusted at least once a year. A build up of dust will increase the energy consumption of the appliance.
Problem solving guide . . . the appliance does not get cool. Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. Unauthorised repairs could be dangerous. The following can be corrected without contacting the Miele Service Department: What to do if . . . . . . strange noises can be heard after switching on the appliance, especially after it has just been installed.
Problem solving guide Once the problem has been resolved the temperature display will light up constantly and the alarm will stop. Bulb specification: 220 – 240 V, max. 15 W, E 14 fitting ^ Screw the bulb into the fitting. . . . a bar lights up/flashes in the temperature display. Only temperatures within the range the machine can display will be shown. If the temperature is not within this range, a bar will be displayed instead. . . . "F1", "F5", "F8" or "FU" appears in the temperature display.
After Sales Service In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee please contact: – Your Miele Dealer or – The Miele Service Department (see back cover for address). When contacting the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate. Please note that telephone calls may be monitored and recorded to improve our service.
Electrical connection Electrical connection U.K. Important The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220 – 240 V 50 Hz supply. The fuse rating is 13 amps. The wires in the mains lead are coloured in accordance with the following code: All electrical work should be carried out by a suitably qualified and competent person in accordance with local and national safety regulations.
Electrical connection Non-rewireable plugs (BS 1363) If this machine is fitted with a non-rewireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with this product, it must be cut off and an appropriate plug fitted. The fuse carrier and the fuse should be removed from the old plug and disposed of. The plug cut from the flexible cord should then be disposed of and on no account be inserted into any socket elsewhere in the house (electric shock hazard).
Installation Ventilation Do not place any appliance which gives off heat, such as a toaster or microwave oven on top of this appliance, as this would increase the appliance's energy consumption. Location The appliance should be installed in a dry, well ventilated room. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room the more energy the appliance requires to operate.
Installation Installation ^ Remove any cable clips from the rear of the appliance. ^ Check that all parts at the rear of the appliance are unhindered. Remove any hindrance. ^ Carefully push the appliance into position. Align the appliance ^ To align the appliance adjust the feet using the spanner supplied.
Changing the door hinging The appliance is supplied right hand hinged. If left hand door hinging is required follow the instructions below. ^ Remove plugs e and unscrew the bracket f. Refit the bracket and plugs on the opposite side. ^ Turn the door around and fit the door handle c. ^ Remove cover g and use it to cover the now empty holes on the opposite side. ^ Hang the door on the upper hinge pin and close the door. ^ Fit the hinge bracket in the lower door bearing.
Alteration rights reserved / 2102 M.-Nr. 05 454 570 / V02 KWL 1090 S, KWL 1630 S, KWL 1900 S This paper consists of cellulose which has been bleached without the use of chlorine.
