Operating and Installation instructions

Installation
*INSTALLATION*
31
Pushing the wine conditioning unit
into the niche
Then push the wine conditioning unit
into the niche, taking care not to
damage the electrical cord.
If you are installing two wine storage
units or a wine storage unit and an-
other refrigeration appliance side by
side, now secure the appliances to
one another (see the instructions for
the side-by-side installation kit).
 To ensure that the wine storage unit
can then be aligned correctly, the
toe-kick ventilation grille must be re-
moved from the appliance toe-kick:
 Carefully guide a flat-head screw-
driver through the toe-kick ventilation
grille on both sides and use it to
push the internal plastic latches out-
ward to release the toe-kick ventila-
tion grille.
 Place the toe-kick ventilation grille to
one side.
5
 Affix edge protection to the adja-
cent cabinet fronts.
 Insert the plug connector at the back
of the wine storage unit (see “Installa-
tion – Electrical connection”).
 Insert the plug into the electrical
socket.
The electrical socket must be close
to the refrigeration appliance and
easily accessible.
 Risk of damage due to electrical
overload.
If the wine storage unit is electrically
overloaded, this can cause a short
circuit and thus damage your wine
storage unit.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.