Operating and Installation instructions

IMPORTANT SAFETY INSTRUCTIONS
10
 In environments with a tropical climate (above approximately 90°F
(32°C) and above approximately 70% humidity), the wine condition-
ing unit must be operated in an air-conditioned room. Otherwise, it is
not possible to guarantee that the wine conditioning unit will operate
without issues.
 Before installation and use check the wine conditioning unit for
any visible damage. Do not operate or install a damaged appliance.
 To ensure safe operation, use the wine conditioning unit only
when it has been installed.
 The wine conditioning unit must be disconnected from the power
supply during installation, side-by-side heater installation, mainte-
nance and repair work. The appliance is only disconnected from the
power supply if:
- the circuit breaker has been tripped, or
- the power cord has been unplugged. Pull on the plug and not on
the cord when removing it from the outlet.
 Installation, repair, and maintenance work should only be per-
formed by a Miele-authorized service technician.
Work by unqualified persons could be dangerous and may void the
warranty.
 Repairs and other work performed by unauthorized persons could
be dangerous and may void the warranty.
 Faulty components must only be replaced by genuine Miele re-
placement parts. Miele can only guarantee the safety standards of
the appliance when Miele replacement parts are used.
Correct use
 The wine conditioning unit is designed for use within a specific cli-
mate class (room temperature range). Do not use in a climate class
for which it is not designed. A lower room temperature will cause the
compressor to switch off for longer periods, meaning that the wine
conditioning unit is unable to maintain the required temperature.