Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Installation dimensions
- Installing the wine conditioning unit
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the wine conditioning unit into the niche
- Aligning the wine storage unit
- Securing the wine conditioning unit in the niche
- Securing the toe-kick board and cover
- Aligning the appliance door
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching the wine conditioning unit on and off
- Selecting additional settings
- Switching on or off /
- Performing a
- Switching on the
- Switching off the
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele@mobile App
- Connecting your wine conditioning unit via the Miele@mobile app
- Connecting your wine conditioning unit via WPS
- Deactivating Miele@home
- Activating Miele@home
- Checking the WLAN connection status
- Setting up Miele@home again
- Resetting the network configuration
- Switching off
- Resetting the settings to their default settings
- Switching on or off
- Switching on or off
- Selecting the
- The ideal temperature and humidity
- Door alarm
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Accessories
48
Accessories supplied
Appliance plug
Chalk
Use the chalk supplied to write on the
magnetic strips on the wooden shelves
for easy identification of the wines in
storage.
Toe-kick cover in stainless steel look
The toe-kick cover in stainless steel
look ensures a uniform stainless steel
appearance.
Optional accessories
A range of useful Miele accessories and
care products are available for your
wine conditioning unit.
Side-by-side installation kit and Top
Frame
To install two or more wine storage
units/refrigeration appliances next to
one another, you will need the side-by-
side installation kit (see “Installation –
Side-by-side”).
You also need a cover (Top Frame KTF)
to connect the wine storage units/refrig-
eration appliances and to cover the gap
above the tops of the appliances.
Hinge pocket
If the door hinging needs to be changed
on your wine conditioning unit, the up-
per toe-kick ventilation grille must be
converted. A new hinge pocket is re-
quired in order to do this.
The door hinging must only be replaced
by Miele Service.
Optional accessories are available
from Miele, your Miele dealer or online
via the Miele website.