Operating and Installation instructions

Installation
*INSTALLATION*
32
Pushing the wine conditioning unit
into the niche
Then push the wine conditioning unit
into the niche, taking care not to
damage the electrical cord.
If you are installing several appliances
side by side, secure the wine condi-
tioning units/refrigeration appliances
to one another now (see the installa-
tion instructions for the side-by-side
installation kit).
 To ensure that the wine conditioning
unit can then be aligned correctly, the
toe-kick ventilation grille must be re-
moved from the appliance toe-kick:
 Carefully guide a flat-head screw-
driver through the toe-kick ventilation
grille  on both sides and use it to
push the internal plastic latches out-
wards to release the toe-kick ventila-
tion grille.
 Place the toe-kick ventilation grille to
one side.
6
5
 Affix edge protection  to the adja-
cent cabinet fronts.
 Insert the plug connector at the back
of the wine conditioning unit (see “In-
stallation – Electrical connection”).
 Insert the plug  into the electrical
socket.
The electrical socket should be close
to the wine conditioning unit and
easily accessible.
 Risk of damage due to electrical
overload.
If the wine conditioning unit is electri-
cally overloaded, this can cause a
short circuit and therefore damage to
your appliance.
When you install appliances side by
side, each appliance must have its
own separate electrical socket.