Operating and Installation instructions

Installation
*INSTALLATION*
49
Securing the toe-kick ventilation
grille and toe-kick panel
 Click the toe-kick ventilation grille 
onto the bottom of the appliance toe-
kick.
 If necessary, cut the toe-kick panel to
the required length and height (cut
along the lower edge of the toe-kick
facing where it touches the floor).
 Secure the toe-kick panel to the bot-
tom of the toe-kick ventilation grille.
Limiting the opening angle of the ap-
pliance door
The door hinges on the wine condition-
ing unit are set at the factory to enable
the appliance door to be opened wide.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°.
 Open the appliance door.
 Insert the pin into the lower hinge
from above.
This will limit the opening angle of the
appliance door to 90°.