Operating and Installation instructions

Selecting additional settings
71
Deactivating Miele@home
 In Settings mode, use the and
sensor controls to select the
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Deactivate and select OK to
confirm your selection.
Deactivation successful will appear on the
display.
 Confirm the message with OK.
Your wine conditioning unit is now dis-
connected from your WiFi network.
The symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Activate and select OK to con-
firm your selection.
Activation successful will appear on the
display.
 Confirm the message with OK.
If the WLAN connection is active,  will
appear on the display.
Checking the WLAN connection sta-
tus
 In Settings mode, use the and
sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the and sensor controls to
select Connection status and select OK
to confirm your selection.
Information about the WLAN connec-
tion status will then appear on the dis-
play:
- connected: there is a strong con-
nection
- connected: there is an average
connection
- connected: there is a weak con-
nection
- disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your wine conditioning unit.
 In settings mode, use the and
arrow buttons to selectMiele@home
and selectOK to confirm your selec-
tion.
 Use the and arrow buttons to
selectSet up again and touchOK to
confirm your selection.
Reset configuration?appears on the dis-
play.
 Use the and arrow buttons to
selectYes orNo and touchOK to
confirm your selection.