Operating and Installation instructions

IMPORTANT SAFETY INSTRUCTIONS
8
Technical safety
 The refrigerant circuit has been checked for leaks. The wine con-
ditioning unit complies with statutory safety requirements.
 This wine conditioning unit contains the coolant Isobutane
(R600a), a natural gas which is environmentally friendly. The coolant
does not damage the ozone layer and does not contribute to the
greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the compres-
sor, you might be able to hear the coolant flowing around the cooling
circuit. Unfortunately, this cannot be avoided, but it does not affect
the performance of the wine conditioning unit.
When transporting and installing the wine conditioning unit, ensure
that no parts of the cooling circuit are damaged. Splashes of coolant
can damage the eyes.
In the event of damage:
- Avoid open flames or anything which creates a spark.
- Disconnect the wine conditioning unit from the electricity supply.
- Ventilate the room where the wine conditioning unit is located for
several minutes.
- Contact Miele Service.
 The more coolant there is in a wine conditioning unit, the larger
the room it should be installed in. In the event of a leakage, if the
wine conditioning is in a small room, there is the danger of com-
bustible gases building up. For every 0.38oz (11g) of coolant at
least 35.3 cubic feet (1m
3
) of room space is required. The amount of
coolant in the wine conditioning unit is stated on the data plate in-
side the wine conditioning unit.