Operating instructions/Installation instructions

Switching on and off
20
As soon as the set temperature has
been reached, the sensor for the re-
spective wine conditioning zone will
light up constantly. The alarm symbol
 will go out as soon as the set tem-
peratures have been reached in each
zone.
The interior lighting will come on when
the door is opened.
Settings
A different setting can be set for each
zone.
 Touch the sensor for the wine condi-
tioning zone you want to adjust the
settings for.
The sensor that has been selected is
highlighted in yellow.
- You can now set the temperature,
and
- switch on the DynaCool function.
Tip: Please refer to the relevant section
for more information.
If you then select a different wine con-
ditioning zone, the settings for the pre-
viously selected zone will remain un-
changed.
Switching off
 Touch the On/Off sensor.
If this does not work, the safety lock
 is still activated.
The sensors for the two wine condition-
ing zones will then go out.
The temperature display will go out and
the mains connection symbol  will
appear.
The interior lighting will go out and the
cooling process will be switched off.
Switching off for longer peri-
ods of time
If the wine unit is not going to be used
for a longer period of time:
 Switch the wine unit off.
 Switch off at the wall and withdraw
the plug from the socket, or discon-
nect the fuse.
 Clean the wine unit.
 Leave the door ajar to air the wine
unit and avoid odours building up in-
side it.
If the wine unit is switched off, but
not cleaned, during a long absence
and the door is left shut, there is a
risk of mould building up inside the
appliance.
The wine unit must be cleaned.