Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Accessories
- Switching on and off
- Selecting further settings
- The optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Active AirClean filters
- Problem solving guide
- Noises
- After sales service and warranty
- Information for dealers
- Electrical connection
- Installation
- Changing the door hinging
Changing the door hinging
60
Remove screw .
Pull out soft-close mechanism and
remove.
Push spacer to the side of the ap-
pliance and remove.
Rotate spacer through 180° and
refit it on the opposite side. Push the
spacer along as far as it will go.
Rotate soft-close mechanism
through 180°. Attach the soft-close
mechanism onto the outside first.
Secure spacer to soft-close mech-
anism with screw .
Caution.
Danger of injury.
Do not move the front part of the
soft-close mechanism in the direc-
tion shown once safety device has
been removed.
Remove red safety device from the
soft-close mechanism.
Refit cover onto the soft-close
mechanism.
Put red safety device back onto
the soft-close mechanism.
Secure cover with screws .