Operating instructions/Installation instructions

Switching on and off
18
As soon as the set temperature has
been reached, the sensor for the re-
spective wine conditioning zone will
light up constantly. The alarm symbol
 will go out as soon as the set tem-
peratures have been reached in each
zone.
The interior lighting will come on when
the door is opened.
A different setting can be set for each
zone.
 Touch the sensor for the wine condi-
tioning zone you want to adjust the
settings for.
The sensor that has been selected is
highlighted in yellow.
– You can now set the temperature,
and
– switch on the DynaCool function.
Please refer to the relevant section for
more information.
If you then select a different wine con-
ditioning zone, the settings for the pre-
viously selected zone will remain un-
changed.
Switching off
 Touch the On/Off sensor.
If this does not work, the safety lock
 is still activated.
The sensors for the two wine condition-
ing zones will then go out.
The temperature display will go out and
the mains connection symbol  will
appear.
The interior lighting will go out and the
cooling process will be switched off.
Switching off for longer peri-
ods of time
If the wine conditioning unit is not going
to be used for a longer period of time,
e.g. whilst on holiday:
 switch it off,
 disconnect it from the mains,
 clean it out, and
 leave the door ajar to air the wine
conditioning unit and avoid odours
building up inside it.
If, during a long absence, the wine
conditioning unit is switched off but
not cleaned and the door left shut,
there is a danger of mould building
up inside the appliance.