Operating instructions/Installation instructions

The optimum temperature and air quality
25
Air quality and humidity
A conventional refrigerator with its low
humidity level is not the best place to
store wine. It is very important to store
wine in an atmosphere with a high hu-
midity level so that the corks remain
moist on the outside. Low humidity
causes corks to dry out from the out-
side so they do not seal the bottles as
tightly. Wine should be stored lying
down to keep the corks moist from the
inside too. Air entering the bottle will in-
evitably spoil the wine.
Do not introduce additional moisture
into the air, e.g. by placing a dish of
water in the appliance, as this will
lead to condensation on the interior
walls, which can cause corrosion
damage.
DynaCool (constant humidity)

DynaCool raises the relative humidity
inside the appliance. DynaCool also
distributes the humidity and the temper-
ature evenly around the interior so that
you can store all your wine under ex-
actly the same excellent conditions.
This will create a stable climate in the
cabinet which imitates that of a wine
cellar.
Switching on DynaCool
If you would like to use the wine condi-
tioning unit to store wine long term, we
recommend that you keep the
DynaCool function switched on.
 Touch the sensor for switching the
DynaCool function on and off so that
it is highlighted in yellow.
Even if the DynaCool function has not
been switched on, the fans in the ap-
pliance will come on automatically
when the cooling system switches on
to ensure your wine is kept in the op-
timum climate.
The fans automatically switch off
when the door is open.
Switching off DynaCool
The appliance uses slightly more energy
and is a little noisier when the DynaCool
function is switched on. You can switch
it off now and then if you wish.