Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- Selecting further settings
- The optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Active AirClean filters
- Problem solving guide
- Noises
- Miele@home
- After Sales / Guarantee
- Information for test institutes
- Information for dealers
- Electrical connection
- Installation
- Changing the door hinging
Temperature and door alarm
27
This wine conditioning unit is equipped
with an alarm system so that the tem-
perature cannot rise or fall unnoticed,
thus possibly damaging the wine.
Temperature alarm
If the temperature in one of the wine
conditioning zones rises or falls by a
certain amount, the sensor for that zone
will flash in the control panel and at the
same time the alarm symbol will
flash in the display.
An alarm will also sound.
Audible and visual signals will be activ-
ated, for example,
– when the wine conditioning unit is
switched on and the temperature in
one of the temperature zones differs
greatly from the set temperature,
– when too much warm ambient air
enters the cabinet when bottles are
being rearranged or taken out,
– when a large number of bottles are
stored for the first time,
– in the event of a power cut.
As soon as the cause of the alarm has
been rectified, the alarm will stop and
the alarm symbol will go out. The
sensor for the relevant zone will light up
constantly again.
Switching the temperature alarm off
early
If the noise disturbs you, you can
switch the alarm off if you wish.
Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The relevant wine conditioning zone will
continue to flash in the control panel
and the alarm symbol will continue
to flash in the display until the cause of
the alarm has been rectified.