Operating instructions/Installation instructions

Feature lighting
29
The interior lighting can be set to re-
main on when the door is closed so
your wines can be on display at all
times.
Each wine conditioning zone has its
own lighting strip so that all three zones
are illuminated.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
Switching the feature lighting
on and off
 Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
The interior lighting is now switched on,
even when the door is closed.
To switch the feature lighting off again:
 Touch the On/Off sensor for the fea-
ture lighting so that it is no longer
highlighted in yellow.
The interior lighting is now switched off
when the appliance door is closed.
Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
 Touch the On/Off sensor for the fea-
ture lighting so that it is highlighted in
yellow.
 Touch the sensor for the feature light-
ing again for approx. four seconds
until  flashes in the display (after two
seconds  will flash).
 Use the  and  sensors for altering
the temperature to set the feature
lighting brightness. Touch and hold
the sensors. The brightness will im-
mediately start to adjust gradually up
or down.
By touching the sensor
– the lighting becomes dimmer
– the lighting becomes brighter.
 Touch the OK sensor to confirm your
choice.
The selected brightness is saved and
the temperature reappears in the dis-
play.
As soon as the appliance door is
closed, the set brightness for the fea-
ture lighting takes effect. When the ap-
pliance door is opened, the interior
lighting returns to its normal level.