Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- How to save energy
- Guide to the appliance
- Accessories
- Switching on and off
- Selecting further settings
- The optimum temperature and air quality
- Temperature and door alarm
- Feature lighting
- Storing wine bottles
- Automatic defrosting
- Cleaning and care
- Active AirClean filters
- Problem solving guide
- Noises
- Miele@home
- After Sales / Guarantee
- Information for test institutes
- Information for dealers
- Electrical connection
- Installation
- Changing the door hinging

Storing wine bottles
33
Annotating wooden shelves
For quick and easy identification of the
wines being stored, you can annotate
the blackboard surface on the magnetic
strips on the wooden shelves.
Use the chalk supplied. You can write
directly on the magnetic strip or remove
it from the wooden shelf to do so:
Hold the magnetic strip by the sides
and pull it forwards. The magnetic
strip is held on the wooden shelf by
magnets.
Annotate the magnetic strip with the
chalk supplied and replace it on the
front of the wooden shelf.
The magnetic strip can be wiped
clean with a damp cloth.
Use clean water only to wipe the
magnetic strips. Do not use a
cleaning agent as this would dam-
age the blackboard surface on the
magnetic strips.
Bottle presenter
The bottle presenter can be used to
raise particular bottles so that they can
be viewed when the door is shut.
To set up the bottle presenter, the
wooden shelf above must be removed:
Remove the wooden shelf and fit the
side covers over the runners.
Position the bottle presenter at the
very front of the wooden shelf re-
quired and place the wine bottle on
the bottle presenter.
If desired, switch on the feature light-
ing (see "Feature lighting") to illumin-
ate the selected bottle.