Operating instructions/Installation instructions

Problem solving guide
45
General problems with the wine conditioning unit
Problem Cause and remedy
There is no audible
alarm although the door
has been open for a
long time.
This is not a fault. The alarm tone has been switched
off in settings mode (see "Selecting further settings -
Audible tones").
You cannot switch the
wine conditioning unit
off.
The safety lock is activated. The symbol is lit up in
the display.
 Deactivate the lock (see "Selecting further settings
- Activating or deactivating the lock").
The slats on the
wooden shelves are
warping.
Volume change due to moisture absorption or drying
out is a typical characteristic of wood. An increase in
humidity will cause wooden components to warp,
which can lead to cracking. Knots and grain patina
are part of the natural character of wood.
Mildew has begun to
form on the wine bottle
labels.
Mildew can begin to form on the labels, depending on
the type of label adhesive used.
 Clean the wine bottles and remove any adhesive
residue.
A white deposit has
formed on the wine
bottle corks.
The corks have oxidised due to contact with the air.
 Use a dry cloth to wipe off the deposit. The de-
posit will not affect the quality of the wine.